





IP20 independent driver, for indoor use.
. Class II protection against electric shock for direct or indirect contact.
. Supplied with terminal cover and cable retainer.
. Input and output terminal blocks on the same side (wire cross-section up to 2,5 mm2 / AWG13).
. Single terminal block on primary and secondary circuits.
. Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 6 mm.
. Current regulation -7 % +5 % including temperature variations.
. Protections:
- against overheating;
- against short circuits;
- against mains voltage spikes;
- against overloads.
Rated voltage 110-240V. Dimensions: 68x41.6x22 mm.
FLOS article code: 150
Be the first to ask a question about this product!
Reference: 151403
IP20 multipower power supply equipped with dip-switch with the selection of the output constant current from 250mA to 700mA. Possibility to adjust the light intensity through the DALI system.
Reference: 141050
Direct current electronic driver 350mA 8W 25V max. Rated input voltage 100-240V. Equivalent to the flos code: RF23065. Power supply with 10-year warranty.
Reference: 125400
Electronic power supply adjustable in constant current from 350mA to 900mA.
Reference: 127715
Direct current electronic driver 350mA 8W 23V MAX. Rated input voltage 100-240V. Power supply with 10-year warranty.
Reference: 122200
LED multipower direct current electronic ballast with DIP SWITCH from 350 to 900mA in constant current, from 10 to 24V in constant voltage.
Reference: 3.7036.701.0
Residential outdoor ceiling light designed for the use of LED lamps.Dimensions (mm): 105 x 150 x 225
Reference: KIT-RGB/MINI-S/CON
Mini Kit radio frequency RGB control unit complete with slim radio control with a maximum reception of 15 meters. To adjust the brightness and color tone in RGB, change color, for 12-24 Volt DC modules or LED strips with RGB input. With a maximum power of 80W at 12V and 160W at 24V.
Reference: ARISL00TRS01T00E27EU
ARIA L suspension lamp in the Large version for indoor environments, with dimmable LED source using specific bulbs. Made of Lentiflex and Cristalflex, it is available in gold and transparent finishes.
Reference: F5600058+F5700058
Flos Parentesi Doppia Nickel, lamp providing direct light from ceiling to floor. Shaped steel tube and moulded elastomer. Dimmable version without bulb included.
Reference: 124385RH
Electronic dimmer with 230V input and 230V phase cut output. Power from 20W to 100W.
Reference: BS2 MINI BL
Mantis BS2 Mini, wall lamp with integrated LED with counterweight for internal areas. Adjustable, black finish.