

Nominal voltage: 100-240V
Features
. Driver for built-in use.
. It can be used for lighting equipment in protection class I and II.
. Input and output terminal blocks on opposite sides (wire cross-section up to 2,5 mm2 / AWG13).
. Single terminal block on primary and secondary circuit.
. Driver can be secured with slot for screws.
. Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads.
Be the first to ask a question about this product!
Reference: 151403
IP20 multipower power supply equipped with dip-switch with the selection of the output constant current from 250mA to 700mA. Possibility to adjust the light intensity through the DALI system.
Reference: 141050
Direct current electronic driver 350mA 8W 25V max. Rated input voltage 100-240V. Equivalent to the flos code: RF23065. Power supply with 10-year warranty.
Reference: 125400
Electronic power supply adjustable in constant current from 350mA to 900mA.
Reference: 127715
Direct current electronic driver 350mA 8W 23V MAX. Rated input voltage 100-240V. Power supply with 10-year warranty.
Reference: 122200
LED multipower direct current electronic ballast with DIP SWITCH from 350 to 900mA in constant current, from 10 to 24V in constant voltage.
Reference: FLOOD20840BSG3
Ledvance Floodlight with PIR sensor and Photocell, 20W LED spotlight for outdoor use. Available in black or white, 3000K or 4000K.
Reference: RF24191
Constant current multi-power ballast for Smithfield lamps by Flos.
Reference: LPV-35-12
IP67 lpv-35 power supply with 36W output power and 12 Volt direct voltage.
Reference: T4601010
LA LINEA - Flexible luminous tube with LED source, wall/ceiling/ground installation for indoor and outdoor environments. White silicone structure, available in 2.5m or 5m lengths. Design by BIG, 2019. Dimmable fixture depending on the chosen power supply (not included).
Reference: 22185101
Tridonic electronic ballast PC 1X21/39 T5 ECO IP for fluorescent tubes 21/36/39/40 w , dimmable with DALI system. Dimensions: 360x30x21mm
Reference: LAM 102 5 09923
Papiro Pallucco LED floor lamp for indoor environments. Mouldable structure available in two sizes and in three different colours.