

Features
Multipower driver supplied with dip-switch for the selection of the output current with integrated wireless ZIGBEE module.
Driver for built-in use.
It can be used for lighting equipment in protection class I and II.
Active Power Factor Corrector.
Current regulation ±5 % including temperature variations.
Input and output terminal blocks on opposite sides (wire cross-section up to 1,5 mm2 / AWG15).
Driver can be secured with slot for screws.
Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads.
Thermal protection = C.5.a.
Operation Mode
Light regulation 0/1 - 100 % by means of PUSH SWITCH function and standard ZIGBEE devices for ZIGBEE integrated WIRELESS module.
Designed to work with ZIGBEE systems.
Full AM DIMMING: 1-100%.
Light regulation 0/1 - 100 % by means of PUSH SWITCH function (mains voltage):
- a short push to turn on and off;
- a longer push to increase or decrease light intensity;
- regulation automatically stops at minimum and maximum values;
- for another on, regulation or off command, release the push button and give the desired command again;
- dimming level memory at mains restore.
Maximum length of the cable, from push button to last driver, must be max. 15 m / 49 ft. In case of applications where the cable is longer than 15 m / 49 ft, keep this separate from the 240 V mains cable.
ATTENTION: only use normally open push buttons with no incorporated warning light.
-16W - 10...54V - 300 mA cost.
-18,5W - 10...54V - 350 mA cost.
-21,5W - 10...54V - 400 mA cost.
-24W - 10...54V - 450 mA cost.
-27W - 10...54V - 500 mA cost.
-29,5W - 10...54V - 550 mA cost.
-32W - 10...54V - 600 mA cost.
-35W - 10...54V - 650 mA cost.
-36W - 10...51V - 700 mA cost.
-38W - 10...50V - 750 mA cost.
-38W - 10...47V - 800 mA cost.
-38W - 10...44V - 850 mA cost.
-38W - 10...42V - 900 mA cost.
-38W - 10...40V - 950 mA cost.
-38W - 10...38V - 1 A cost.
-38W - 10...36V - 1,05 A cost.
For more information, see the attached PDF
TCI wireless products belonging to this family have as a plus the ZigBee standard protocol that makes them compatible with a very wide range of ZigBee devices already available on the market. The capacity of this system is highly extended as it is based on a mesh network, while all the easyto-fi nd accessories guarantee its extreme fl exibility in terms of building an ad-hoc solution. Our ZigBee products are ideal also for all those applications requiring both on-site and remotecontrol to achieve important cost savings, thanks to the scheduling via gateway and the monitoring of consumptions with a wattmeter. All the information can be collected and stored in the Cloud.
Be the first to ask a question about this product!
Reference: 127630
The CASAMBI Professional TCI is a direct current multipower power supply with DIP-SWITCH to select the required DC, complete with antenna.
Reference: 127641
CASAMBI wireless adjustable direct current electronic ballast 120W Max at 24V, with voltage output for LED modules, three outputs for RGB LED modules with CASAMBI wireless module. Brightness adjustment 0/1 - 100% by PUSH function or compatible devices for integrated CASAMBI WIRELESS module.
Reference: 127645
CASAMBI Maxi Jolly wireless adjustable electronic ballast in direct current 25-60W 350mA-1,05A.
Reference: 122576
ZIGBEE Professional wireless adjustable DC electronic power supply with DIP-SWITCH from 16-38W - 350mA-1,05A. Dimming 0/1 - 100 % via PUSH SWITCH function and ZIGBEE standard devices for integrated ZIGBEE WIRELESS module. Dimensions: 146.5x44x30mm
Reference: 127637
CASAMBI Mini interface TW. Interface able to convert the CASAMBI WIRELESS type signal into 0/1...10 V signals which allows the control of a LENS VECTOR device. The converter can be powered directly from the mains (100 ÷ 240 VAC). Dimension: 115x34x19mm
Reference: 1573000
24 Karat Blau table lamp, ideal for indoor use.
Reference: A04-S51-S00B
Isol, indoor suspension lamp. Available in two colors and two sizes: small 30/76 or large 30/126.
Reference: 14736
Seletti Bird Playing, led table lamp, made of resin. Suitable for all environments.
Reference: A40NIP30300N
NIP 303 power supply Leds driver miniaturized, small dimensions in constant current of 700mA 8,4W 12Volt Max. Dimensions: 60x40x20mm
Reference: STR242094020
5m flexible LED strip with power 17W-1850/2000lm per meter at 24V DC, 8mm wide. High luminosity coil available in four different colours, 2700k and 3000K warm light at 1850lm/m, 4000K neutral light and 6500K cold light at 2000lm/m.
Reference: FA81
Frame for false ceiling recessed installation, of Cielo spotlights by Flos collection. Available for both size variants.