TCI Driver LED DC JOLLY DALI 32W Dimmable Dali

Tci power supply in constant and direct current, multipower equipped with dip-switch for selecting the current or output voltage.

• Multipower driver supplied with dip-switch for the selection of the output current.
• IP20 independent driver, for indoor use (DC JOLLY DALI).
• Class II protection against electric shock for direct or indirect contact (DC JOLLY DALI).
• Driver for built-in use (DC JOLLY BI DALI).
• It can be used for lighting equipment in protection class I and II (DC JOLLY BI DALI).
• Active Power Factor Corrector.
• Analogical input (NTC) for thermal sensor connection.
• Current regulation ±5 % including temperature variations.
• Input and output terminal blocks on the same side (wire cross-section up to 1,5 mm2 / AWG15).
• Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm (DC JOLLY DALI).
• Protections: - against overheating and short circuits; - against mains voltage spikes; - against overloads.
• Thermal protection = C.5.a.
• Nominal voltage 110-120V
• Dimensions 103x67x21 mm

Dip-switc selection of the constant output current Variants:

• 12 (12)W 10...48V   250 mA cost. 
• 14 (14)W 10...48V   300 mA cost.
• 17 (15)W 5...48V 350 mA cost.
• 19 (15)W 5...48V 400 mA cost.
• 22 (15)W 5...48V 450 mA cost.
• 24 (15)W 5...48V 500 mA cost.
• 26 (15)W 3...48V 550 mA cost.
• 28 (15)W 3...48V 600 mA cost.
• 31 (15)W 3...48V 650 mA cost.
• 32 (15)W 3...46V 700 mA cost.
• Constant voltage output - Uscita in tensione costante
• 10 (10)W 12 cost.  900 mA max.
• 20 (15)W 24 cost.  830 mA max. 
• * The power in W between partents refers to the current 110-120V