

Features
. Independent driver with case IP52 (see page info7 for the correct connection of connecting leads).
. 0/1...10 V interface insulated from the output.
. For connections use wire rated for at least 90° C (195° F).
. AC/DC electronic driver with output in voltage, specific for installations in compliance with the standards of lighting applications.
. Class II protection against electric shock for direct or indirect contact.
. Supplied with connecting leads on primary and secondary circuits for connection (cable length 30 cm / 11,81 ).
. Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads.
. UL approval:
- Dry and damp location;
- Class2;
- Type HL;
- Class P.
Be the first to ask a question about this product!
Reference: 151403
IP20 multipower power supply equipped with dip-switch with the selection of the output constant current from 250mA to 700mA. Possibility to adjust the light intensity through the DALI system.
Reference: 141050
Direct current electronic driver 350mA 8W 25V max. Rated input voltage 100-240V. Equivalent to the flos code: RF23065. Power supply with 10-year warranty.
Reference: 125400
Electronic power supply adjustable in constant current from 350mA to 900mA.
Reference: 127715
Direct current electronic driver 350mA 8W 23V MAX. Rated input voltage 100-240V. Power supply with 10-year warranty.
Reference: 122200
LED multipower direct current electronic ballast with DIP SWITCH from 350 to 900mA in constant current, from 10 to 24V in constant voltage.
Reference: LFP45422
Tecno Vintage Mini Ball light bulb dimmable, 220-240V with small E14 screw connection in satin opal glass, having a power of 4W led at 320 ° degrees of opening, which develops a luminous flux of 340lm. Very warm light tone 2200k. Possibility to adjust the light intensity.
Reference: MAN7807
Nature ceiling lamp with dimmable LED fan, for indoor use, controlled by RF remote control or by App via Bluetooth. Available in 3 finishes.
Reference: A40FLAT112WB
QTI FLAT independent electronic power supply for 350 mA 110-240V constant current power LEDs, suitable for installations in small spaces thanks to its very compact dimensions of 126x47x15mm.
Reference: L0382 OS
Alba 382 floor lamp, dimmable. The family is completed by two floor-standing versions, both resting on an anthracite-colored base from which an important rectangular section stem in satin brass and anodic bronze finishes.
Reference: ROS10CMBRONZO+PORTALBRONZO
Lamp : E27/E26, Power : up 250w, Voltage : 85 > 250v, size diameter rosette: 100mm , size total height: 80mm,
Reference: 9003/2/NC
Double wooden base for wall installation for electrical components in porcelain or ceramic.