

TCI Dali Casambi Interface is able to convert the CASAMBI WIRELESS signal into DALI signals (up to 4 independent channels) and 1-10V (I=10mA).
The interface powers the DALI bus, up to 40 devices (up to 64 with additional DALI power supply).
Through the CASAMBI APP it is possible to configure and control the DALI network. Suitable for DALI DT6 - DT8 (TW - RGB) devices. IP20 independent interface, for indoor use (DALI CASAMBI). Can be used for lighting fixtures in protection class I and II ( DALI CASAMBI BI). Opposing input and output terminals (cable section up to 0.5 - 1.5 mm2 / AWG20 - AWG15).
Available with terminal covers and without terminal covers.
Protections:
Casambi is an advanced lighting control system based on Bluetooth Low Energy (BLE) technology. BLE is a cutting-edge wireless technology, the only one with low energy consumption, integrated in all modern smartphones, tablets and smart watches, and the only one in the world ready for the challenges of the future.
Intelligent
Casambi devices have their own intelligence. Intelligence is replicated in each node so that nowhere along the path is there a chance for errors to occur. The system itself in constant consensus-based synchronization. 1.2 Connected Casambi devices connect when needed. An Internet connection is not required for general operation and ordinary functionality. Bluetooth Low Energy technology already implemented in smartphones and tablets, therefore possible to establish connections without additional gateways. The connection speed between a smart device and Casambi devices is quick and uninterrupted, just open the App to start the connection to the system.
Intuitive
This intuitive system: at the first connection the nodes are associated automatically and can be used and customized by anyone, without the need to involve experts for commissioning.
Wireless
The Casambi network is based on the Bluetooth Low Energy protocol, the best wireless technology with high energy efficiency and ready for the challenges of the future. 2.Bluetooth Low Energy
Bluetooth Low Energy, also known as Bluetooth 4.0+, Bluetooth Smart or simply BLE, was originally designed by Nokia as Wibree and was adopted by the Bluetooth Special Interest Group (SIG) and released in 2010. The low energy feature of BLE allows developers to build products powered by small button batteries or energy storage devices, making BLE the best protocol to use in wireless lighting control applications.
Dimensions:
For more information, consult the attached PDF
Be the first to ask a question about this product!
Reference: 181220
The TCI CBU-ASD is a wireless control unit for LED and halogen drivers with 0-10V, 1-10V or DALI dimming interface. The control output can be configured as an analogue control interface with 0-10V (and 1-10V) or digital driver with DALI Standalone. It can control up to 3 DALI drivers.
Reference: 127644
CASAMBI Maxi Jolly wireless adjustable electronic ballast in direct current 18.05-50W 350mA-1,2A , with analogue input (NTC) for thermal sensor connection Brightness adjustment 0/0,5 - 100% by means of PUSH and APP function. Dimension: 124x79x22mm
Reference: 151572
ZIGBEE Maxi Jolly adjustable wireless direct current electronic ballast with DIP-SWITCH from 18.5-50W - 350mA-1,2A , with analogue input (NTC) for thermal sensor connection.Brightness adjustment 0/0,5 - 100% by PUSH function devices ZIGBEE standard for built-in ZIGBEE WIRELESS module. Dimensions: 124x79x22mm
Reference: 181224
CBU-TED is a Bluetooth controllable, Casambi enabled trailing-edge dimmer for operation of incandescent lamps, dimmable LED lamps and dimmable LED control gear.
Reference: 151570
ZIGBEE Maxi Jolly adjustable wireless direct current electronic ballast with DIP-SWITCH from 25-60W - 350mA-1,05A , with analogue input (NTC) for thermal sensor connection. Brightness adjustment 0/0,5 - 100 % by PUSH device function ZIGBEE standard for built-in ZIGBEE WIRELESS module.
Reference: 122553
ZIGBEE Mini Interface ZB3. Interface capable of converting the WIRELESS ZB3 signal into DALI or 0/1...10 V signals. The converter can be powered directly from the mains (100 ÷ 240 VAC) or from a 12-24 VDC voltage. Dimensions : 115x34x19mm
Reference: F3305009
Flos Kelvin Led F, floor lamp with adjustable head, for indoor use. Available in three different finishes.
Reference: 0391030A
Logico, Dimmable wall lamp with E27 fitting bulbs not included. Structure in grey steel and blown glass diffuser, available in two colors Silk or Fumé. The colors in the photos may not correspond to the real ones.
Reference: 3.X336.015.0
Plastic base for wall surface installation, for Walky Large Round and Walky Large Square lighting fixtures.
Reference: A089412+A033100
Aggregato Saliscendi, suspension lamp for interiors. Spherical diffuser 40 cm.