

TCI Dali Casambi Interface is able to convert the CASAMBI WIRELESS signal into DALI signals (up to 4 independent channels) and 1-10V (I=10mA).
The interface powers the DALI bus, up to 40 devices (up to 64 with additional DALI power supply).
Through the CASAMBI APP it is possible to configure and control the DALI network. Suitable for DALI DT6 - DT8 (TW - RGB) devices. IP20 independent interface, for indoor use (DALI CASAMBI). Can be used for lighting fixtures in protection class I and II ( DALI CASAMBI BI). Opposing input and output terminals (cable section up to 0.5 - 1.5 mm2 / AWG20 - AWG15).
Available with terminal covers and without terminal covers.
Protections:
Casambi is an advanced lighting control system based on Bluetooth Low Energy (BLE) technology. BLE is a cutting-edge wireless technology, the only one with low energy consumption, integrated in all modern smartphones, tablets and smart watches, and the only one in the world ready for the challenges of the future.
Intelligent
Casambi devices have their own intelligence. Intelligence is replicated in each node so that nowhere along the path is there a chance for errors to occur. The system itself in constant consensus-based synchronization. 1.2 Connected Casambi devices connect when needed. An Internet connection is not required for general operation and ordinary functionality. Bluetooth Low Energy technology already implemented in smartphones and tablets, therefore possible to establish connections without additional gateways. The connection speed between a smart device and Casambi devices is quick and uninterrupted, just open the App to start the connection to the system.
Intuitive
This intuitive system: at the first connection the nodes are associated automatically and can be used and customized by anyone, without the need to involve experts for commissioning.
Wireless
The Casambi network is based on the Bluetooth Low Energy protocol, the best wireless technology with high energy efficiency and ready for the challenges of the future. 2.Bluetooth Low Energy
Bluetooth Low Energy, also known as Bluetooth 4.0+, Bluetooth Smart or simply BLE, was originally designed by Nokia as Wibree and was adopted by the Bluetooth Special Interest Group (SIG) and released in 2010. The low energy feature of BLE allows developers to build products powered by small button batteries or energy storage devices, making BLE the best protocol to use in wireless lighting control applications.
Dimensions:
For more information, consult the attached PDF
Be the first to ask a question about this product!
Reference: 181220
The TCI CBU-ASD is a wireless control unit for LED and halogen drivers with 0-10V, 1-10V or DALI dimming interface. The control output can be configured as an analogue control interface with 0-10V (and 1-10V) or digital driver with DALI Standalone. It can control up to 3 DALI drivers.
Reference: 127644
CASAMBI Maxi Jolly wireless adjustable electronic ballast in direct current 18.05-50W 350mA-1,2A , with analogue input (NTC) for thermal sensor connection Brightness adjustment 0/0,5 - 100% by means of PUSH and APP function. Dimension: 124x79x22mm
Reference: 151572
ZIGBEE Maxi Jolly adjustable wireless direct current electronic ballast with DIP-SWITCH from 18.5-50W - 350mA-1,2A , with analogue input (NTC) for thermal sensor connection.Brightness adjustment 0/0,5 - 100% by PUSH function devices ZIGBEE standard for built-in ZIGBEE WIRELESS module. Dimensions: 124x79x22mm
Reference: 181224
CBU-TED is a Bluetooth controllable, Casambi enabled trailing-edge dimmer for operation of incandescent lamps, dimmable LED lamps and dimmable LED control gear.
Reference: 151570
ZIGBEE Maxi Jolly adjustable wireless direct current electronic ballast with DIP-SWITCH from 25-60W - 350mA-1,05A , with analogue input (NTC) for thermal sensor connection. Brightness adjustment 0/0,5 - 100 % by PUSH device function ZIGBEE standard for built-in ZIGBEE WIRELESS module.
Reference: 1646010A
Microsurf, minimalist wall light with integrated LED for interiors. White painted die-cast aluminum structure.
Reference: GRF 624M 20628
Graffiti Pallucco led chandelier for indoor environments. Anthracite-colored aluminum structure with magnetic profile and stainless steel bars available in two sizes: 1800mm and 2400mm
Reference: C00275CHNWF
iLed for Linea Light Nitum Q, square recessed spotlight made of brass. Available in four finishes and three colour temperatures. Power supply not included, can be purchased separately (see accessories).
Reference: 81717V15
iLed per Linea Light Suelo R walk-over floor recessed LED spotlight for outdoor IP68 round. Available in 2 different light colors and in three different light beams.
Reference: PROLRGB/100
Extension lead 4x0,50mm for BOX4RGB, BOX9RGB and RGB STRIPS. Available in two different lengths of 100 and 200 centimeters.
Reference: 127701
TCI STMP IP54 electronic ballast in constant current/voltage 700mA 6/8W 2...12V of very small dimensions with IP54 casing, suitable for installation in damp places or with water sprays. Dimensions: 52.5x46x26.5mm