

Driver Snappy LED with power 100W input voltage 200-240V output voltage 24V dc 4.17 A IP20. Dimensions 312x27x18.2 mm
Reference: LPV-150-24
Led driver costant voltage, 150W 24V, Waterproof IP67, Short-circuit protection.
Reference: LRS-150-24
Switching power supply LRS 150 24 with output voltage: 24V DC, adjustable between 21.6 and 28.8V DC. Output current: 6.5A. Maximum output power: 156W.
Reference: LRS-100-12
Switching power supply output connection: 12V DC, adjustable between 10.2 - 13.8V DC. Output current: 8.5A. Maximum output power: 100W.
Reference: LRS-100-24
Power supply with output voltage: 24V DC, adjustable 21.8 - 28.8 Vdc. Output current: 4.5A. Maximum output power: 100W. Protection: overload, overheat, voltage rise, short circuit.
Be the first to ask a question about this product!
Reference: AL2524D-IP
DALI dimmable power supply 25W 24Volt, for outdoor use IP67 waterproof. Dimensions: 135x33x35mm
Reference: DIM24-100
Driver for modules and LED strips, 24V / DC at constant voltage for a maximum power of 100W, dimmable via the Triac system or Phase Cut (Leading edge or trailing edge dimmer)
Reference: DIM24-50
Driver for modules and LED strips, 24V / DC at constant voltage for a maximum power of 50W, dimmable via the Triac system or Phase Cut (Leading edge or trailing edge dimmer)
Reference: LT-75-24
Super thin power supply for LED modules and strips, 24V AC/DC constant voltage for a maximum power of 75W, reliability and ease of installation are the qualities of this product. Dimensions: 305 x 30 x 17 mm
Reference: SNP150-24VF-1
LED driver 24V MAX 150W 200-240V AC
Reference: RF28230
The flos uses this dimmer kit with cable to power the model in the led version of the Toio lamp by Achille and Pier Giacomo Castiglioni designed in 1962. Possibility to adjust the light intensity.
Reference: LL6112NE
Round lamp with a diameter of 40 cm, for ceiling and wall in satin opal triplex blown glass, and transparent base for indirect light. Complete with two E27 screw lamp holders for LED bulb. Design Federico De Majo
Reference: LL6113NE
Round lamp in the largest version of the series with a diameter of 48 cm, for ceiling and wall in satin opal triplex blown glass, and transparent base for indirect light. Complete with three E27 screw lamp holders for LED bulb. Design Federico De Majo
Reference: 0885312
Kartell Colonna decorative stool made of thermoplastic technopolymer, designed by Ettore Sottsass. Available in a range of 5 finishes.
Reference: FA523243
TAU L 1054 - Linear wall or ceiling lamp with LED source, for outdoor environments. Polycarbonate body available in transparent or opal finish. Fixing brackets and caps included. The power cord and the remote power supply must be ordered separately.
Reference: ETPAR105I
For led or halogen, Output 12 V AC 35-105 W, Dimmable with trailing edge phase control,