Single-channel Dimmer with landing edge Output push

Characteristics:

• Single-channel Dimmer with Phase Cut Output.
• Power range: 80-230V AC 50/60Hz.
• Maximum resistive load 1A (see table)
• The device is not earthed.
• Protection from accidental contact is guaranteed by the enclosure.
• Conductor diameter 14-22 AWG (0.205-2.08 mmq).
• Control Inputs: Non-isolated push button x1.
• UL Printed Circuit Board.
• Made in Italy
• Protection class: IP20.
• Standard dimensions 40x45x22 mm.
• Open circuit protection.
• Protection from voltage peaks.
• Overcurrent protection.
• Use only in dry environments
• Do not connect inductive loads
• Do not connect to UPS with output other than Pure Sine Wave.
• IMPORTANT: The lamps that can be controlled by a single dimmer must all be the same.
• All controlled loads must be declared DIMMABLE by the manufacturer.

For more information, see the attached PDF