Simes Linea Continua glass 24V Recessed LED IP67

CHARACTERISTICS OF THE MATERIALS

Fixing base and formwork in EN AW-6060 anodized extruded aluminum with low copper content and high resistance to oxidation. Mechanical resistance IK 10 Maximum load 500 Kg

LIGHTING PERFORMANCE

Diffuser in transparent glass with a thickness of 15mm. Light source, with fixed lamp position. Yield --

LOW SURFACE TEMPERATURE

Diffuser temperature 39°C (Ta 25°C)

FORMWORK FOR INSTALLATION AND MAINTENANCE

The formwork is made of aluminum and is provided with a tear-off protective cover, to be removed after cementing the formwork flush with the floor and before installing the appliance.

WIRING

Continuous line is equipped with fixing supports that allow easy installation and perfect alignment of several products. Using the interlocking formwork/support system, it is extremely simple to level and align the formwork. The wiring is external to the formwork. The appliance can be leveled using adjustment bolts. Luminaire pre-wired with a single 0.15m SILICONE power cord. The result is a continuous line of light.Class of insulation: CLASS III

Product variants

1000 cm etched

• 3000k - 10,3W 737lm - Ottica 75°x91°
• Tunable white - 12W -715lm- Ottica 78°x95°
• RGBW - 14,4W - 215lm - Ottica 74°x90°

1000 cm trasparent

• 3000k - 10,3W 737lm - Ottica 78°x108°
• Tunable white - 12W -715lm- Ottica 74°x108°
• RGBW - 14,4W - 215lm - Ottica 74°x108°

1500 cm etched

• 3000k - 15,5W 1105lm - Ottica 75°x91°
• Tunable white - 18W -1072lm - Ottica 78°x95°
• RGBW - 14,4W - 322lm - Ottica 74°x90°

1500 cm trasparent

• 3000k - 15,5W 737lm - Ottica 78°x108°
• Tunable white - 18W -715lm- Ottica 74°x108°
• RGBW - 21,6W - 215lm - Ottica 74°x108°

For more information, see the attached PDF