

Electronic ballast in metal case for (L) 3x18W, 4x18W fluorescent lamps. The ballast is primarily designed for Indoor application. For outdoor application, the luminaire should be minimum ClassIand need to be sufficiently protected against water & dust. The installation should also be guard against any lightening surge or any other necessary electrical protection as deemed in such typical installation & application.
Be the first to ask a question about this product!
Reference: PTI35SM
Osram 35W S Mini, For HID Lamps 35W, Energy efficiency index EEI: A2, Power supply voltage: 220 ... 240 V, Line Frequency: 50 ... 60 Hz, RI suppression: to EN 55015 / CISPR 15.
Reference: PTFIT70I
Powertronic PTi 70 / 220-240 I download halide lamp electronic ballast 70w
Reference: QTISE2X36
Osram ballast 220-240Volt Quicktronick QTIS Instant Start electronic for two 2xL36W bulbs. Dimensions: 359x31x28mm. For fluorescent lamps.
Reference: QTI2X354980GII
QTI 2x35-49-80 quicktronic GII intelligent electronic ballast, phase cut dimmable.
Reference: QTI2X2854N
Osram electronic ballast QTi 2x28/54/35/49 g2 for fluorescent tubes 28-35-49-54 W , dimmable with cut-off system. Dimensions: 360x30x21mm
Reference: 0455020A
Artemide Logico Suspension 3 in Line, suspension lamp with three sources, dimmable with diffused and direct light, for indoor use. Blown glass diffusers and aluminum structure. Available in two different finishes. The colors in the photos may not correspond to the real ones.
Reference: 0226
Galvanized iron threaded niples for nut M10X1, accessory for lampholder rosettes available in three different lengths 15, 20 and 25 mm.
Reference: 427537/11
OUT, floor lamp for indoor and outdoor use with integrated LED, dimmable DALI. Available in six colors. Version 4275 with fixed base to the floor.
Reference: PA60UGR40WBN
40W LED panel, 60x60cm high brightness 4000lm with 4000K neutral light. White aluminum powder-coated aluminum alloy frame. Anti-dazzle prismatic diffuser built to guarantee UGR <19 in any location.