

For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor
For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor




The Lampo 12-24V In-line On-Off Touch Switch Sensor Semi-transparent is a touch control device by Lampo Lighting, crafted in semi-transparent PVC and designed to switch LED strips and low-voltage LED systems on and off with a simple touch. Its compact footprint — 106 mm in length, 57 mm in width and 34 mm in depth — makes it easy to integrate into any installation while maintaining a discreet, clean appearance.
This inline switch is especially suited for LED strip applications in residential settings such as the kitchen, the bedroom or the living room. Compatible with 12-24 V DC input voltage, it is installed after the LED transformer and handles loads up to 48W at 12V and 96W at 24V. Connection is via two cable clamps (max. 1.5 mm²), with a 100 mm input cable and a 1,500 mm output cable for flexible routing. Mounting is secured with included double-sided adhesive tape. The IP20 protection rating and insulation class III confirm its suitability for indoor use. Two versions are available: art. INLINE/TOUCH for a maximum load of 48W at 12V, and art. INLINE/TOUCH24 for a maximum load of 96W at 24V.
For dimensions, technical specifications and further product information, please refer to the attached PDFs.
Our team usually replies within 2 business hours.
Fill out the form below. We will reply to you by email as soon as possible.
Reference: 0811-93-0100-NXBE
Recessed ceiling rose in matt metal for Glo suspension lamps. Hole for plasterboard Ø50 mm - thickness 10-15 mm. Matt white finish.
Reference: EL3/4x14s-u
Electronic ballast ballast for 3/4x14 W non-dimmable fluorescent lamps
Reference: EC0240A
ECOdrive digital programmable driverled, 20W Max power in constant current adjustable from 150 to 1050mA offers LED devices the best regulation with DALI2 system without flickering, up to 1% of light power.
Reference: 738-0163-21
Track spotlight Ivela Trim, body in aluminum and socket E27 MAX 100W PAR30 for LED bulb and triphase track adapter included
Reference: NAVE250SUPER
Osram VIALOX NAV-E 250W 4Y E40, high-pressure sodium vapor lamp with 31,600 lm luminous flux for road and industrial lighting.
Reference: F3171057
Flos IC T1 Low, table lamp for indoor use, in the lower version. Available in three finishes. Light source NOT included.