

For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor
For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor








Wall and ceiling-mounted luminaire, designed for use with LED lamps and a patented, light blade effect optic. The product consists of a support base and screen. The base is made of phosphocromatization treated, die-cast aluminium, with a double base coat and passivation at 120°C. It is coated with liquid acrylic paint, cured at 150 °C to guarantee a high level of weather and UV ray resistance. The optic is made of methacrylate. All the screws used are made of A2 stainless steel. Design by Dean Skira
Requires 350ma constant current power supply. For outdoor use with an IP66 waterproof rating.
Installation: Wall and ceiling mounted by means of a stainless steel wall fixture plate.
Wiring: Product supplied with an outlet cable L=200mm. Electronic ballast to be ordered separately.
Notes: Compatible with the Master Pro DMX control system.
Reference: A40RP312000B
350 mA constant current power supply at 48V (16W) with an IP65 degree of protection for the outdoor. Ideal for a minimum of 3 LEDs to a maximum of 12 220V LEDs, while in 110V a maximum of 9 LEDs.
Reference: LPC-20-350
Mean Well LPC-20-350 power supply, 20W constant current LED driver at 350mA, output voltage up to 48V DC, IP67 rated.
Reference: A40MN300000B
Indipendent driver - IP20 - Isolation's Class 2, Output in steady voltage and current 350mA, 4.2W Max, Self-resetting protection against overtemperatures, against open circuit and against output short circuits., Input voltage 190V · 265V/AC.
Reference: A40MPL1031WN
Independent power supply qlt mpl3 IP20 Insulation class || , input voltage 100-240 Volt. Constant current output 350mA and 4.2W Max.
Reference: 151403
IP20 multipower power supply equipped with dip-switch with the selection of the output constant current from 250mA to 700mA. Possibility to adjust the light intensity through the DALI system.
Reference: 141050
Direct current electronic driver 350mA 8W 25V max. Rated input voltage 100-240V. Equivalent to the flos code: RF23065. Power supply with 10-year warranty.
Reference: 3.MZ53.013.0
iGuzzini Adjustable Base accessory for Trick Light Blade effect versions. Diameter Ø89mm, for indoor and outdoor environments.
Reference: 3.X475.000.0
iGuzzini Ground spike for Trick in the Light Blade effect versions. Upper diameter Ø30mm, for outdoor environments.
Our team usually replies within 2 business hours.
Fill out the form below. We will reply to you by email as soon as possible.
Reference: 101206
Wire Table Ø30, decorative table lamp for indoor use. Cylindrical wire frame in chrome-plated steel, hemispherical lampshade. Available in different finishes.
Reference: P06401.002.0401
Carmen, ceiling lamp, ideal for indoor installation. Available in different variants.
Reference: 09622 1000
Lodes A-Tube,thin tubular suspension lamp with a diameter of 6 cm, suitable for use in indoor environments. Made of metal, they are available in three different sizes and finishes. Ceiling rose not included, check the specifications in the product description.
Reference: P12501.033.0403
Carl2, ceiling lamp, ideal for indoor installation. Available in different variants.
Reference: 0453782
Kartell Four Extendable, extendable table up to 260 cm. Made of steel and scratch-resistant top, it is available in two finishes and in indoor or outdoor versions.
Reference: 3.MZ53.013.0
iGuzzini Adjustable Base accessory for Trick Light Blade effect versions. Diameter Ø89mm, for indoor and outdoor environments.