

The body of the fitting, reflector, frame and opal diffuser screen are made of self-extinguishing shatter-proof polycarbonate. This fitting is designed for emergency lighting with TC-EL fluorescent lamp 11W. The screen is fixed to the body by four captive screws that allow for protection degree IP66. The base comes complete with double PG11 for through wiring. The base is intended for application either on threebody recessed universal connector block (type 503) or watertight external cable trays with rigid pipes ( 16/20mm) by a special junction (accessory). The system functions only in emergency conditions (SE), beginning to operate in the event of power supply failure. Emergency operation 1 hour. Battery recharge time 12 hours. NiCd 3.6V 1.5Ah batteries are used. The fitting is equipped with an autotest device with operation LED. The fitting permits deactivating the emergency operation for short periods (Rest Mode); when power supply is started again, the emergency system resumes its functions too. The fitting permits deactivating the emergency operation for long inactivity periods (Inhibition Mode); it needs manual restarting. The operation LED shows if the fitting is functioning properly or there is a fault. LED on - steady light: correct operation (during the test the LED is on). Quickly flashing LED: lamp fault. Slowly flashing LED: insufficient battery autonomy. LED off: faulty battery (LED off in emergency). The screen is fixed to the body by four captive screws that allow for protection degree IP66.
Installation
Surface-mounted.
Be the first to ask a question about this product!
Reference: 3.R657.701.0
Escape route signaling with pictogram and LED source. Available in two different sizes.
Reference: PROLRGB/100
Extension lead 4x0,50mm for BOX4RGB, BOX9RGB and RGB STRIPS. Available in two different lengths of 100 and 200 centimeters.
Reference: QTISE2X58
Osram electronic ballast QTIS e 2x58 for fluorescent tubes 58W . Dimensions: 360x40x28 mm
Reference: 145358
Litio, outdoor spotlight with adjustable spike with resin diffuser with GX53 lamp holder. Available in three different colors. Lamp included.
Reference: F0090009-3X
Flos AIM suspension lamp with 3 MULTICHIP 16W LED 2700K with warm light that develops a luminous flux of 895 lumens each, with a color rendering index CRI90. White finish, with multiple canopy included.