

For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor
For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor










Outdoor luminaire for wall recessed installation with LED light source. Body in AISI 316L stainless steel treated with PVD (Physical Vapor Deposition) process. Thanks to this innovative treatment, after the polishing or brushing process according to the chosen finish (see Product Family), the Real Matter surfaces are covered with a thin film of metals such as zirconium and titanium which, combining with the steel at the molecular level, increase the characteristics of both mechanical resistance and atmospheric agents, allowing the creation of fine and durable finishes. Diffuser in UV stabilized polycarbonate. The luminaire is supplied with two outgoing power cables (L 2000mm) and an IP-sealed connection kit. The 24V power supply (not included) can be installed remotely or housed behind the fixture in the casing. Possibility to choose the light temperature between 2700K and 3000K.
Real Matter is produced in 3 different versions (Order the correct code based on the desired installation method):
- In masonry or concrete with recess box to be ordered separately (see Accessories).
- In plasterboard wall surface with springs included (surface thickness of min 5 mm - max 20 mm).
- In masonry or concrete without formwork needed: the appliance is glued directly onto the surface (glue to be chosen by the installer based on the material on which the appliance will be installed).
Reference: LPV-20-24
Mean Well LPV-20-24 constant voltage LED driver: 24V DC, 20W, 0.84A, IP67 rated, universal input 100–240V AC.
Reference: LPV-35-24
Mean Well LPV-35-24 constant voltage LED driver, 35W, 24V DC, 1.5A, IP67 rated for indoor and outdoor use.
Reference: LPV-60-24
Mean Well LPV-60-24 power supply, 60W, 24V DC constant voltage, 2.5A, IP67 waterproof, universal input 100-240V.
Reference: LS24/45W
Power supply for LEDs in constant voltage 24V in thermoplastic material, 45W 2A max power, for internal use in energy class II. Complete with 1.20 m long power cable and 1.50 m output cable. Input current 100-240V. Dimensions: 35 x 122 x 52 mm.
Reference: LS24/30W
Slim plastic power supply for LEDs in 24V, in constant voltage, capacity 35W 1.25A, for indoor use in energy class II. Input current 200-240V. Thin dimensions: 17 x 155 x 50mm. Equivalent to Snappy model: SNP30-24VF-3
Reference: F5962000
Recessed PVC formwork for flos real matter.
Reference: LS24/15W
Ideal driver for LED strips and LED chips or 24V devices. Possibility to install the product in very small spaces as the power supply very thin.
Reference: RF25752
Power supply 24Vdc 20W 2200-240V IP67 Class II selv. Ideal for Flos products.
Our team usually replies within 2 business hours.
Fill out the form below. We will reply to you by email as soon as possible.
Reference: 618
Isyluce Prisma 618, rectangular ceramic wall lamp for interior with 2 E27 lamp holders included and tempered two glass diffusers up and down. Dimensions 420x80x115mm
Reference: 09.8405.DY
Gustave Residential - Portable lamp with rechargeable battery via USB-C, with dimmable LED source. Available in seven finishes and two different versions. For indoor and outdoor use. Design by Vincent Van Duysen, 2022. The Hospitality version is also available (see Product Family).
Reference: F5960066
Outdoor luminaire in polished copper finish. Steplight for wall installation with LED light source. Available in three different installation versions. Design by Piero Lissoni.
Reference: 122792
TCI DC BMU power supply with 12W output power and 700 mA constant current, 100-240 Volt input voltage.
Reference: ACCNCUB.0EURO
Cuboluce E14 special limited edition Euroluce 2023, table lamp with adjustable reflector, indirect light, for indoor use. Technopolymer body, aluminium reflector.
Reference: 80706 99
Lodes fixing hook for Stitch lamps. See description for compatibility.