Flos In Vitro Unplugged LED battery Floor Lamp For Outdoor

Product Information:

The structural parts of the appliance are made of die-cast and extruded aluminum treated with a chemical conversion process in order to achieve an efficient resistance to atmospheric agents. The body is powder coated and available in various finishes. Integrated LED light source with Edge Lighting optical technology to ensure perfect light uniformity. Integrated on-off or dimmable 100-240V power supply. Battery life of 6 hours, rechargeable with Micro USB. Optical switch sensor on the base providing a 4-step brightness adjustment function. USB C charging cable included in the package useful length 120 cm. Plug in USB charger with interchangeable plugs

Designer: Philippe Starck

Lamp category: LED
Power (W): 2
CCT (K): 3000K
CRI: 90
Net lumens (lm): 200
Supports: ground
Environment: for outdoors

Type of lighting: direct
LED type: side lighting
Light distribution: symmetrical
Optic type: diffused light
Beam angle (°): 111
Beam angle C90-270 (°): 11

Frequency (Hz): 50-60
Voltage (V): 100-240
Dimmable: 4 gradual dimming function

Driver: integrated
Degree of protection IP65. Insulation class: I.

Colors: anthracite, black, white, forest green, pale green, terracotta and brown

The 2700K light version is available on request

Dimensions: Diameter x Height mm | 110 x 300 mm

Notes: It is recommended to use a connection system with a degree of protection greater than or equal to the degree of protection of the device. During the assembly and maintenance of the devices, special care must be taken not to damage the powder coating. Combined damage to the action of water could cause corrosion. Chemicals damage the corrosion protection. LED luminaires can show faults attributable to electrical stresses affecting the relative insulation with triggering of destructive electrical discharges. These stresses may arise from: . overvoltages from the power supply network of the system / appliances. . overvoltages of electrostatic origin (ESD) from the environment. We recommend the installation of a surge protection device on the electrical system that attenuates the intensity of some of these phenomena, protecting the devices from irreversible damage. The choice of the most suitable device must be calibrated according to the characteristics of the system.