Lighting unit with diffuse light for exterior ceiling installation. Integrated opalescent diffuser and external protection in transparent borosilicate glass. The structure is made of die-cast and extruded aluminium treated with a chemical conversion process for effective resistance to atmospheric agents.
The body is powder coated and comes in various finishes. Integrated LED light source with Edge Lighting optical technology to guarantee perfect uniform lighting. Light source included. Ceiling mount. Integrated 220,240 V ON/OFF or dimmable electrical power
Designer: Philippe Starck
Lamp category: LED Power (W): 13 CCT (K): 3000K CRI: 80 Net lumens (lm): 714 Supports: Ceiling Environment: for outdoors
Type of lighting: Direct LED Type: Edge Lighting Light distribution: Symmetric Optic type: Diffused light Beam angle (°): 111 Beam angle C90-270 (°): 111
Frequency (Hz): 50-60 Voltage (V): 100-240 Driver: integrated Driver type: not dimmable Emergency: Without Degree of protection IP66. Insulation class: I.
Color: Anthracite, Black, White, Forest Green, Pale Green, Terracotta and Dark Brown. Orientation: fixed Dimension: 180 x 425 mm | Base: 150 x 31 mm
The Dali and 110V dimmable version with 3000K or 2700K light is available on request
Notes: It is recommended to use a connection system with a degree of protection greater than or equal to the degree of protection of the device. During the assembly and maintenance of the devices, special care must be taken not to damage the powder coating. Combined damage to the action of water could cause corrosion. Chemicals damage the corrosion protection. LED luminaires can show faults attributable to electrical stresses affecting the relative insulation with triggering of destructive electrical discharges. These stresses may arise from: . overvoltages from the power supply network of the system / equipment. . overvoltages of electrostatic origin (ESD) from the environment. We recommend the installation of a surge protection device on the electrical system that attenuates the intensity of some of these phenomena, protecting the appliances from irreversible damage. The choice of the most suitable device must be calibrated based on the characteristics of the system.