- add remove
- add remove
- Strip led 220V
Strip LED COB 5M 14W/m 220V IP65 Dimmable Light color tone-3000°K WARM LIGHTAvailable in different variants$132.39 $92.67- On sale!
- -30%
Lampo Strip LED 5050 60led/m 24V 14.4W/mt Reel 5M 72W Light color tone-3000°K WARM LIGHT, Version-IP20 For IndoorAvailable in different variants$75.37 $45.22- On sale!
- -40%
Alcapower Strip LED Snake Flex profile 11W/m 220V IP65 Dimmable Light color tone-3000°K WARM LIGHT, Lunghezza-5 metersAvailable in different variants$227.28 $159.10- On sale!
- -30%
- add remove
- add remove
- add remove
- Strip led 220V Strip LED COB 5M 14W/m 220V IP65 Dimmable Light color tone-3000°K WARM LIGHTAvailable in different variants$132.39 $92.67
- On sale!
- -30%
Lampo Strip LED 5050 60led/m 24V 14.4W/mt Reel 5M 72W Light color tone-3000°K WARM LIGHT, Version-IP20 For IndoorAvailable in different variants$75.37 $45.22- On sale!
- -40%
Alcapower Strip LED Snake Flex profile 11W/m 220V IP65 Dimmable Light color tone-3000°K WARM LIGHT, Lunghezza-5 metersAvailable in different variants$227.28 $159.10- On sale!
- -30%
- add remove
Reference: 22176176
Dimmable electronic ballast for 1% to 100% dimming. For lamps T5 linear fluorescent tubes of 21W or 39W with a diameter of 16 mm (TCL 40W) with high luminous efficiency.
Reference: 137962/242
TCI multi-lamp ballast and MBQ 242/2 electronic power for lamp 1 / 2x26 1 / 2x26-32 1 / 2x42 1x57 1x70 1x22 + 1x40 1 / 2x22-40 for independent use for fluorescent lamps. The product does not include the cable cover, as shown in the photo.
Reference: 097555
Huco electronic ballast for one or two bulbs of 2x26W - 2x32W (TC-DEL/TEL), 2x18W - 2x24W (TC-L/F), 2x22 / 1x22/40W (T16-R) Dimensions: 123x79x33mm. For fluorescent lamps.
Reference: QTISE2X36
Osram ballast 220-240Volt Quicktronick QTIS Instant Start electronic for two 2xL36W bulbs. Dimensions: 359x31x28mm. For fluorescent lamps.
Reference: 9137001950
Philips HF-PERFORMER electronic ballast for two bulbs of 2x26W - 2x32W - 2x42W. Dimensions: 123x79x33mm. For fluorescent lamps: PL-T, PL-C and PL-R.
Reference: MB118/2
TCI Mini electronic ballast for 1x18W lamp bulb for independent use of fluorescent lamps. For bindings: G24d-2 - GX24d-2 Lamps: TC-D - TC-T
Reference: 158
Philips electronic ballast 1x58w. Dimensions: 280x30x28mm
Reference: 183047
Ferromagnetic ballasts for 400W HS and HI lamps. Dimensions: 75x72x165 mm For high pressure sodium lamps (HS) and metal halide lamps (HI).
Reference: 536140
Ballast for HS and HI Lamps 1000 W. Shape: 92x102 mm For high pressure sodium lamps (HS) and metal halide lamps (HI).
Reference: 183245
Electronic ballast for discharge lamps, independent use with double terminal cover, with Wieland (ST-18) connector 220-240V 50 / 60Hz, for 1x35W or 1x70W metal halide lamp.
Reference: PTI35S
For HID Lamps 35W. Energy efficiency index EEI: A2. Power supply voltage: 220 ... 240 V. Line Frequency: 50 ... 60 Hz. RI suppression: to EN 55015 / CISPR 15
Reference: 4M1P0703
High performance control gear for discharge lamps.
Electronic and electromechanical ballasts
Electronic and electromechanical ballasts for neon fluorescent discharge lamps, or sodium vapor and metal halide. Multi-power electronic ballasts for classic 36/58w tubes or for slim 21w/28w/39w/54w fluorescent tubes. The choice of electronic ballast is always preferable to electromechanical ballast, as it guarantees longer lamp life and less flicker, as well as higher consumption efficiency. The only downside to electronic ballasts concerns the ignition phase, in fact the electronic regulators have a very low ignition time and this leads to all the transformers turning on at the same time. In systems with undersized protection switches, the magnetic-thermal protection device could trip. Market leading brands are Tridonic and Osram.