Dyson Airblade Tap Wash Dry Sink Hands Dryers Wall-Mounted

Dyson Airblade Tap Wash+Dry is the integrated hand washing and drying system developed by Dyson, designed to be mounted directly over the sink or on the wall. Thanks to Airblade™ technology, it combines a tap and hand dryer in a single unit, eliminating the need to move to a separate drying area. The aluminum color finish gives the product a professional and contemporary look, ideal for high-traffic environments. The system is compatible with input voltages of 100–240 V and is approved for use across major international markets (EU, AUD, USA, UK, JAP).

The Dyson Airblade Tap is designed for professional settings such as public restrooms, hotels, offices and commercial spaces, where hygiene, speed and efficiency are essential priorities. Every second, the device channels up to 21 litres of filtered air through slots with a maximum diameter of 0.55 mm, projecting air blades at 549 km/h that dry hands in just 14 seconds. The integrated HEPA filter captures 99.95% of bacteria and viruses present in the air, ensuring drying with clean, uncontaminated air. The filter consists of a grid for larger particles, a layer of woven fabric that traps dust and fibres, and a layer of pleated HEPA material capable of filtering particles down to 0.1 microns. The Dyson V4 digital motor reaches up to 81,000 rpm at 1000 W, making it one of the most compact fully integrated motors in its class. Annual running costs are up to 78% lower than paper towels and up to 98% lower than other electric hand dryers. The system is suitable exclusively for indoor installation, up to a maximum altitude of 2,000 m, with a rated power of 1000 W, supply voltage of 200–240 V at 50/60 Hz, and a required water pressure of 1–8 bar with a 1/2" BSP pipe thread. The Dyson Airblade Tap is available in three configurations: WD04 short neck, WD05 long neck and WD06 wall-mounted version, to suit different installation types and bathroom layouts.