Reference: T250/NE

Lampo Lighting

Mini dimmer with push button for LED, incandescent and halogen lamps with LED light for signaling mains presence. In thermoplastic material. For a minimum power of 10W and a maximum of 150W. Halogen and incandescent 150W Max. Available in black or white. Dimensions: 30x70x18 mm

Reference: 123999L

TCI

The rotating electronic potentiometer CP is used for regulation of electronic drivers with interface 1...10 V. 140mm long cable.

Reference: RF28045

Flos spare parts

Spare round rondò dimmer and ignition, for Flos lamp, in the version with LED bulb of maximum 100W.

Reference: RF28230

Flos spare parts

The flos uses this dimmer kit with cable to power the model in the led version of the Toio lamp by Achille and Pier Giacomo Castiglioni designed in 1962. Possibility to adjust the light intensity.

Reference: DLM1224-1CV-DALI

Dalcnet

Dalcnet dimmer for low voltage LED modules from 12 to 48 volts DC. Adjustable with Dali signal, DMX, 1-10 V, push button

Reference: 551010.0DA

Daylight Italia

The AC Dimmer is a single channel dimmer output phase-cut and it adjusts the brightness of dimmable LED lamp, dimmable halogen lamp and AC phase-cut power supply. Adjustment by Push Button.

Reference: RF6608100

Flos spare parts

Flos Button and plug dimmer with black cable for Flos Taccia in the LED version.

Reference: 180427

TCI

Universal TRIAC pushbutton dimmer for LED lamps 230 V for standard 35 mm rail.

Reference: 124385RH

TCI

Electronic dimmer with 230V input and 230V phase cut output. Power from 20W to 100W.

Reference: RF36804

Flos spare parts

Flos electronic dimmer, replacement for lamp model Snoopy by Flos. Original replacement. WARNING!!! The touch dimmer is not compatible with the old resistive version of the Snoopy lamp. Input voltage 100-240V.

Reference: 162113

TCI

Universal flush-mounted regulator with separate push button. It can control: halogen and incandescent lamps, electronic transformers, LED Driver DIM, dimmable LED lamps (with Trailing edge technology - IGBT)

Reference: 905

Helvar

The 905 Router uses an Ethernet connection (10/100 Mb/s) to control a local DALI network. Basic functionality is available out of the box without any programming.