

AC DIMEMR + FADER
DC Input 230Vac
Command:
- N.O. Push Button
1 output at 200W max
1 output channel for R-C loads
Adjustable the brightness of white light
Single channel dimmer output phase-cut (trailing edge) For LED Lamp dimmable and Halogen
Lamp dimmable.
Typical Efficiency > 95%
Memory function
Push Menù:
- Minimum value of dimming adjustable
- Power-on ramp (fade up) and Power-off ramp (fade-out) adjustable
Optimized output curve
Soft Start and Soft stop
100% Functional Test
Be the first to ask a question about this product!
Reference: 551010.00A
Resistive power adjustable 25-400W (Incandescent and Halogen lamps), Inductive power adjustable 25-300W (Toroidal transformers, Electromechanical and Electronic), Led and CFL lamps dimmable 4 - 200W, Led lamps 12Vac with transformer 10 - 200W, Modules ACRICH 230V 4 - 150
Reference: 551039.0DA
The AC Dimmer is a single channel dimmer output phase-cut and it adjusts the brightness of dimmable LED lamp, dimmable halogen lamp and AC phase-cut power supply. Adjustment by Push DALI.
Reference: A40IRC2
IRC2-RGB receiver system to be combined with RGBOX30 / 35. Out of production .
Reference: A40KITDIM
Interface kit and 433 Mhz radio control for dimmer brightness adjustment, ideal for 12-24 Volt DC LED modules or strips. Complete with receiver radio control included in the kit. With a maximum power output of 120W at 12V and 240W at 24V. The kit consists of the following codes: A40RC433DIMN + A40PDL43DIMB
Reference: 7657-10-W31
16A Capacity, Input 220/380 V, Allows the ' addition of additional power, Coupling for 4 tracks.
Reference: F5911030
Flos Ray T, table lamp for indoor use. It is available in three different finishes. The light source is not included.
Reference: 14922
Seletti Monkey lamp sitting, resin led table lamp.
Reference: 905/18.20 T . BKM . 3000K
Lucilla, Floor lamp with dimmable LED source by remote control. Made of painted metal, it is available in the three different finishes White, Black, Bronze, Sand and Gold. Inclinable and orientable sources.