Dalcnet Dimmer LED 12V-24V-48V Dali /push/0-10V/APP

The dimmerLED is suitable for driving loads such as stripLEDs and LED modules, white and single-color at constant voltage. It is possible to connect a 12-24-48Vdc power supply. The maximum value of the output current that can be delivered is equal to 10A. The dimmerLED has the following protections: over-power protection, under-power protection, reverse polarity protection, input fuse protection, output short circuit protection, short circuit detection and circuit detection open on exit. Using the Dalcnet LightApp mobile application it is possible to configure multiple parameters of the MINI-1CV-DALI such as dimming frequency, dimming curve, max and min brightness level, fade time etc. LightApp can be downloaded for free from the Apple APP Store and the Google Play Store.

Protections

• Overvoltage protection
• Undervoltage protection
• Reverse polarity protection
• Input fuse protection
• Short circuit protection
• Short circuit detection
• Output open circuit detection

Characteristics

• Power input: 12-24-48 Vdc
• Power Current: Max 10A
• Voltage output for stripLED and LED modules
• Connector type: Screw terminals
• Control of WHITE and SINGLE COLOR light
• Device configuration and DALI commissioning using Dalcnet LightApp mobile application
• BUS command: DALI
• Constant voltage outputs for resistive loads
• PWM modulation
• PWM frequency settable by APP
• Regulation curve settable by APP
• Fade time can be set from the APP
• Soft on and off
• Extended temperature range
• 100% functional test

For more information, see the attached PDF