

Wall-mounted touch unit with color temperature control output.
Reference: A40PDL43CT0B
Interface for 433 Mhz radio control for adjusting brightness and color temperature between warm white and cold white. For 12-24 Volt DC LED modules or strips. With a maximum power output of 120W at 12V and 240W at 24V.
Reference: WLINC
Recessed formwork box, to be installed with many lighting control and management systems. Dimensions: 80 x 80 x H38 mm
Reference: WLSUP
Formwork box for surface wall mounting, to be installed with many lighting control and management systems. Dimensions: 86 x 86 x H33 mm
Be the first to ask a question about this product!
Reference: A40WALLDIMON
Wall touch control unit, with dimmer light management function. To be combined with the receiver remote control (A40RC433DIMN) for brightness control of LED strips or 12V or 24V modules. With a consumption of 0.4W (sleep) / 1.5W (action) output at 433 MHz.
Reference: A40WALLRGB2B
2.4GHz RF Control Unit Touch Remote Control with RGB / RGBW Output / Dimmer / tunable white Variable Color Temperature
Reference: A40DALI1000B
Brightness regulator with DALI/1-10V potentiometer or button control, 12-24V VDC power supply (12A max) for LED strips and modules.
Reference: A40DALI1103B
Brightness controller with control DALI or 1..10V with low voltage push, For resistive loads up to 12A, Input 12V-24V/DC, Dimensions 138x40x28,5 mm,
Reference: A40PDCV1000B
PDCV driver power supply for LEDs with constant voltage at 24V for a maximum of 13W (230V) and 10W (110V). Possibility to adjust the light intensity through 1-10V system with the use of a simple NA (Normally Open) button. Ideal for strips and LED modules.
Reference: 1594050APP
LED NET CIRCLE circular ceiling lamp with 18 dimmable LED sources, managed via Artemide APP. Structure made of aluminum and methacrylate light source covers.
Reference: A40PDMCD000B
Dimmable multipower power supply PDMCD Driver for LEDs in constant current from 100mA to 700mA for a maximum of 13W (230V) and 9W (110V). Possibility to adjust the light intensity through DALI or Push system with the use of a simple NA (Normally Open) button.
Reference: RF1491109
Flos replacement diffuser for Mini Button lamp produced by Flos. Available in polycarbonate or glass.
Reference: E1-C
Electronic switch with touch spring to be incorporated and connected to 12V and 24Volt LED strips with memory and dimmer function included in the switch. Ideal to be applied inside aluminum profiles and profiles. It manages up to a maximum of 72W at 24V and 36W at 12V.
Reference: 05848BD
Madame Rubelli, PC armchair suitable for indoor use. Upholstered in Rubelli fabric. Available in two variants.
Reference: F264613370BINE
Uovo, outdoor floor/table lamp.