

Converter for High Brightness LEDs
Hi, if these modules are powered with a 24VDC power supply that can output PCM 24VDC, is it possible to therefore dim with these modules with a 5W 500mA load attached?
Hi ,
yes id dimmable , the current decreases according to the applied voltage when the load remains unchanged .
Reference: lvq
The LVQ converter is used to convert the constant voltage in input 12 / 24v in constant voltage and constant current in output (700mA).
Reference: A40LVX00000N
Constant voltage converter (12V or 24V) at 350mA constant current. For power LED modules. Dimensions: 40 x 18 x 12 mm. For 1 to 3/6 * led modules. * Input 11-15V max 3 Led - Input 22-24V max 6 Led
Reference: A40LVP00000N
Constant voltage converter (12V or 24V) at 350mA constant current. For power LED modules. Dimensions: 51 x 32 x 18 mm. For 1 to 3/6 * led modules. * Input 11-15V max 3 Led - Input 22-24V max 6 Led
Reference: A40LVY00000N
12-24 volt constant voltage to 700mA constant current converter for LED modules
Reference: A40LVL00000N
Constant voltage converter (12V or 24V) at 500mA constant current. For power LED modules. Dimensions: 51 x 32 x 18 mm. For 1 to 3/6 * led modules. * Input 11-15V max 3 Led - Input 22-24V max 6 Led
Reference: A40CPL20600B
QTI CPL Waterproof independent electronic ballast for LEDs with constant voltage and current power at 500 mA 12 W, suitable for installations in small spaces thanks to its very compact dimensions of 124x56x19mm.
Reference: A40PWMREP00B
Amplifier PWMR or signal repeater for control unit with RGB, dimmer or color temperature signal. With a maximum output power of 288W at 12V and 576W at 24V.
Reference: 1DPT101221EL0
Dina+ Light Blue color - Table lamp with rechargeable battery, with USB input for smartphone, for indoor environments. Aluminum structure, interchangeable polycarbonate diffuser. The lamp consists of N.1 structure + N.2 interchangeable diffusers included (Transparent and White).
Reference: 0210W10APP
Lamp Artemide Calipso ceiling or wall lamp in technopolymer, with a power of 10W that emits a luminous flux of 2884 lumens available IN extra warm light 2700K or warm light 3000K. Having a diameter of 526 mm and a height of 76mm. Version with APP control. Designed by Neil Poulton for Artemide.
Reference: 927019
20 meters dimmable Milky COB LED strip, flexible and bendable. Power 14W/m (280W total) with a total of 432 LED/m at 220-230V AC. Suitable for outdoor use IP65. Available with 3000K, 4000K or 6000K light temperature.
Reference: 131D01XOK27220
DOT 800 - Dimmable LED suspension lamp, with thermodynamic technology, for indoors. Aluminum structure, metal stems and painted steel reflector. Available in two finishes.