

Areas of application
Shop lighting
Health and fitness areas (in dry, corrosion-protected place)
Effect and accent lighting
Product benefits
Extended terminal section enables mains looping . Screw-down cable clamps for reliable strain relief Long reliable life at maximum permitted temperatures . Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL)
Be the first to ask a question about this product!
Reference: PTI35SM
Osram 35W S Mini, For HID Lamps 35W, Energy efficiency index EEI: A2, Power supply voltage: 220 ... 240 V, Line Frequency: 50 ... 60 Hz, RI suppression: to EN 55015 / CISPR 15.
Reference: QTISE2X36
Osram ballast 220-240Volt Quicktronick QTIS Instant Start electronic for two 2xL36W bulbs. Dimensions: 359x31x28mm. For fluorescent lamps.
Reference: QTI2X354980GII
QTI 2x35-49-80 quicktronic GII intelligent electronic ballast, phase cut dimmable.
Reference: QTI2X2854N
Osram electronic ballast QTi 2x28/54/35/49 g2 for fluorescent tubes 28-35-49-54 W , dimmable with cut-off system. Dimensions: 360x30x21mm
Reference: QTITE2X1842DALI
QTI dali 2x18-42 dim quicktronic intelligent dali dim power supply ballast
Reference: E27110827D
E26 glass bulb for USA 110-120V current, dimmable, with a luminous flux of 800 lumens at 360 degrees with 2700K warm white tone.
Reference: 98084
iLed per Linea Light, 19.2W / m LED Ribbon adhesive strip continuous line light effect adhesive, at 24V DC is a 5m roll with a width of 10mm with 1200 LEDs available in the shade of warm white light 2700K warm light.
Reference: DK100N + LAMPS
Black cord with 10 bulbs included 3000K warm light for exterior and interior. Length 10.5m.
Reference: ORLANDO20G
Orlando 20 high efficiency led spotlight, with 20W power for outdoor environments. Painted aluminum body and tempered glass diffuser. Available in two colors and in three different shades of light color.
Reference: 138893
Live Campana, LED table lamp with integrated RGB color variation, for outdoor use. Light body-diffuser in opaque white polycarbonate. Portable device with rechargeable battery.
Reference: 1031/F/RA+1032/RA
E27 lampholder with ring for lampshade, Vintage style, finish Copper.