Luce & Light Corso 3.0 recessed round spotlight 15W IP67 230V

Luce & Light Corso 3.0 is a 15W IP67 recessed round spotlight designed for floor installations in outdoor and indoor environments subject to heavy vehicular traffic. The dissipating body in thermoconductive technopolymer ensures excellent corrosion resistance, even in saline environments, while the AISI 316L stainless steel ring and the 10 mm extra-clear tempered glass screen with high transmittance provide impact and scratch resistance with IK08 certification. The integrated LED light source, powered directly at 220-240V via a built-in driver, delivers an average lifespan of 50,000 hours with a colour rendering index of CRI80.

Thanks to its approval for vehicular loads up to 2,000 kg, the Corso 3.0 is ideally suited for driveways, car parks, building entrances, pedestrian walkways and high-traffic urban areas. The fixture features an IP68 connector with an integrated IS system, compatible with H07RN-F cable (minimum cross-section 2x1, cable diameter from 7 to 12 mm), allowing direct connection between the luminaire and the mains for fast and safe wiring. Annealed silicone gaskets ensure long-lasting UV resistance while preserving all mechanical properties over time. The IPS (Intelligent Protection System) protects the luminaire against water infiltration, reverse polarity, hot-plugging, ESD and overvoltages; the PID (Protective Impedance Device) provides additional protection against low-energy external electrical events. The 148 mm diameter and overall height of 112 mm integrate seamlessly into floor surfaces, while six available optics — 13°, 40°, 58°, 12°x67°, diffused and asymmetric — allow the light beam to be tailored to any project requirement, reaching heights of up to 7 metres thanks to the high-efficiency TIR optical system. The operating temperature ranges from -20°C to +45°C, with a maximum luminaire temperature of 50°C (Ta 25°) and a glow wire test rating of 960°C. Compatibility with EU, AUS, USA, UK and JAP voltages makes the Corso 3.0 suitable for international projects. Available in colour temperatures of 2700K, 3000K and 4000K. Energy efficiency class F.

Please note: the formwork is not included and must be purchased separately in order to complete the installation.