

Bright 2.8 is an outdoor recessed fitting (not suitable for immersion in swimming pools and fountains), for ceiling, wall or floor installation, carriageable up to 2000 Kg. The LED light source has a power of 3.5W, with luminous flux 143 Lm and light temperature to choose between 2700K (warm light) or 4000K (neutral light). Bright is a ±15° adjustable spotlight, with a choice of 8°, sharp 36°, sharp 68° optics (see image with optical scheme). The body is made of black anodized anticorodal aluminum, the trim is in AISI 316L stainless steel, while the screen is in transparent tempered glass, with a stainless steel finish. It has an IPS (Intelligent Protection System) protection system, which has the function of protecting the lighting fixtures from water infiltrations that can occur in the event of connection errors between the cables.
NOTE: The installation formwork is sold separately.
Reference: WC0100
Luce & Light installation formwork in solid surfaces, for Bright 2.8 and Bright 2.9 spotlights. Dimensions D. 72x120 mm.
Be the first to ask a question about this product!
Reference: CB47000FRI
Bright 4.7, round recessed floor steplight for outdoor use, with Led source. Radial optics. Aluminum body, steel ring.
Reference: CB24011FVII
Bright 2.4, round recessed spotlight for outdoor use with Led source. Anodized aluminum body, stainless steel ring, tempered glass screen. Available in several versions.
Reference: CB29010FSI
Bright 2.9, square recessed LED spotlight for outdoor, adjustable and carriageable, with IPS protection system. Anodized aluminum body, stainless steel trim, tempered glass screen. Available in different versions.
Reference: CW16001LI
Bright 1.6, recessed walkable floor spotlight with IP68 immersion LED source for outdoors. Body in AISI 316L steel. Dimensions: Ø35x52mm. 5m neoprene cable includedy in AISI 316L steel. Dimensions: Ø35x52mm. 5m neoprene cable included. Formwork not included.
Reference: CB10129SAI
Bright 1.0, walk-over floor recessed spotlight with IP68 outdoor LED source. Body in AISI 316L steel. Dimensions: Ø35x52mm. 5m neoprene cable included.Formwork not included.
Reference: 28830SP
MR16 Multi Spot LED SMD high brightness bulb with a diameter of 50mm and a total height of 55mm, with GU10 socket OF 7W to 240V. Available in two versions with warm light 3000k and neutral light 4000k.
Reference: 9137001950
Philips HF-PERFORMER electronic ballast for two bulbs of 2x26W - 2x32W - 2x42W. Dimensions: 123x79x33mm. For fluorescent lamps: PL-T, PL-C and PL-R.
Reference: A40U115C4W00
QLT recessed indoor spotlight for 111ø mm AR111 bulb available in two light aperture variants: 30° and 45°. With a luminous flux of 1940 lumens in RGB light plus warm white 3000K.
Reference: SAUVIGNON/P/O
Aldo Bernardi Sauvignon, LED floor lamp glass holder. Brass or nickel colored metal body. Available in versions with or without glasses (chalices).
Reference: PL1K88324CN1ACG2
Preva LED COIN Bulb in 220-240V at 22.5W can also be used as an LED replacement for high intensity discharge lamps up to 35W, it emits a luminous flux of 1850 lumens in 3000K warm light with a 24° or 40° degree beam opening. Dimensions 50x111 mm. Duration 35,000 hours. Weight 340 g
Reference: 08800B4
Kartell Stone decorative stool made of polycarbonate, suitable for indoor use. Available in a range of 7 finishes.