Luce & Light Bright 1.6 316L 24V recessed spotlight for outdoor

Luce & Light Bright 1.6 is a recessed outdoor spotlight rated at 2W and 24V DC, designed for walk-over installations in floors, walls or ceilings in outdoor environments exposed to extreme weather conditions. The body and ring nut are made entirely of AISI 316L stainless steel, renowned for its exceptional corrosion resistance, while the lens is crafted from transparent tempered extra-clear glass. With compact dimensions of Ø35x52 mm and a recessed hole of just Ø30 mm, the Bright 1.6 integrates discreetly and elegantly into any surface.

This spotlight is perfectly suited to enhancing outdoor spaces such as gardens, terraces, pathways and pedestrian areas, thanks to its walk-over construction with an impact resistance rating of IK10 and an IP65-IP68 classification that ensures complete protection against dust and water immersion. Luce & Light's patented IPS (Intelligent Protection System) shields the luminaire from water infiltration caused by cable splicing errors, while also providing electrical protection against reverse polarity, hot plug, electrostatic discharge (ESD) and overvoltages. The light source is a power LED with 2-step MacAdam colour tolerance and a rated lifespan of 60,000 hours L90 B10 (at Ta 25°C), with a colour rendering index of CRI 80. The luminous flux is 195 lm, available in 3000K warm white and 4000K neutral white colour temperatures; 2200K, red, green and blue tones are available on request. The beam angle can be selected from 10°, 43° and diffused, with additional options including 21°, 21° sharp, 54° sharp and 15°x38° available on request. The fixture is dimmable and operates within a temperature range of -20°C to +45°C, with a maximum appliance temperature of 50°C (Ta 25°C). A 5 m neoprene cable H05RN-F 2x0.35/0.75 Ø6.3 mm is included; the driver is not included and must be purchased separately. The technical volume required for thermal dissipation is Ø80x100 mm. Photobiological safety complies with IEC TR 62778:2014, and the glow wire test is passed at 960°C. Every unit is tested and approved via an E.O.L. test (End Of Line test) with verification of electrical absorption parameters. The formwork is essential for mounting the spotlight and is not included in the package. The energy consumption class is F, in accordance with EU regulation 2019/2015.