Luce & Light Bright 1.0 316L recessed spotlight for outdoor 500mA

Luce & Light Bright 1.0 316L is a recessed spotlight for outdoor use, 2W LED, designed and manufactured by Luce & Light with body and ring nut entirely in AISI 316L stainless steel, renowned for its outstanding corrosion resistance. With compact dimensions of Ø35x52 mm and a recessed hole of Ø30 mm, the Bright 1.0 is designed for ceiling, wall and walk-over floor installations, weighing just 200 g. The IK10 mechanical resistance rating and the IP65-IP68 protection degree ensure reliable performance even in the most demanding environmental conditions.

Thanks to its advanced technical features, the Bright 1.0 is the ideal solution for illuminating walkways, floor surfaces, façades and high-end outdoor settings. The patented IPS (Intelligent Protection System) shields the luminaire from water infiltration caused by cable splicing errors, while also providing electrical protection against reverse polarity, hot plug, ESD and overvoltages. The light source is a power LED with 2-step MacAdam technology, ensuring outstanding chromatic uniformity and an estimated lifespan of 60,000 hours L90 B10 (at Ta 25°C). A CRI 80 colour rendering index and availability in 3000K warm white and 4000K neutral white colour temperatures — as well as the 2200K variant and red, green and blue colour options — allow the installation to be tailored to any design requirement. The available beam angles — 10°, 43° and diffused — provide great flexibility during lighting design. The spotlight is dimmable and powered by 500mA constant current; the driver is not included and must be purchased separately. The lens is made of transparent tempered extra-clear glass, ensuring optimal light transmission. A 5 m neoprene cable H05RN-F 2x0.35/0.75 Ø6.3 mm is included. The operating temperature ranges from -20°C to +45°C, with a maximum appliance temperature of 50°C (Ta 25°C). The technical volume for thermal dissipation is Ø80x100 mm. Every unit is tested and approved through an E.O.L. test (End Of Line test) with verification of the electrical absorption parameters. The glow wire test is certified at 960°C and photobiological safety complies with IEC TR 62778:2014. The insulation class is Class III and the energy efficiency class is F in accordance with EU regulation 2019/2015. The formwork is essential for mounting the spotlight and is not included in the supply.