

For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor
For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor














Originally designed in 1971 by Verner Panton, Panthella is still a design icon that preserves its original design. The Panthella 250 Portable is a new addition to the collection that allows easy placement on windowsills, shelves or tables. It can be charged with an included USB cable, and the battery can be replaced at the end of its life for long-term use. When fully charged it provides about 5.5 hours of light at maximum intensity (100%) and up to 79 hours at 10% intensity. It also has a nut at the top of the reflector that allows you to adjust and turn the light on or off.
Panthella is available in a wide range of finishes, with opal or opaque screen:
CONCEPT - The lamp has a translucent white opal screen that provides diffused ambient light by directing some of the light downward onto the base, which is designed to reflect light upward.
MATERIALS - Injection-molded acrylic or polycarbonate screen. ABS or injection-molded base and housing. Injection-molded opal polycarbonate diffuser.
ASSEMBLY - USB-C cable length: 2.5m for standard USB adapter not included. Light control: switch on top nut. BATTERY INCLUDED: 2 Li-Po batteries (6400 mAh), rechargeable and replaceable.
SOURCE: LED 6W 2700K 456 lm.
Our team usually replies within 2 business hours.
Fill out the form below. We will reply to you by email as soon as possible.
Reference: 125504
Electronic power supply adjustable in constant current from 350mA to 1.2A. Multipower supply equipped with dip-switch with the selection of the output current. IP20 independent power supply, for indoor use. Possibility to adjust the light intensity through the DALI, ADIM or Push system. Nominal voltage 110-127V or 220-240V. Dimensions 124x79x22 mm
Reference: 827
70x70mm square plaster ceiling cube in plaster. GU10 100-240V lamp holder inside the box. Ideal for low consumption LED bulbs.
Reference: BISPLED/SLC/BF
Small capsule bulb in silicone complete with 24 SMD LEDs for a total run of 2.2W with G4 connection in 12 volts AC / DC.
Reference: 127394
TCI BMU MD 700 driver with 10W output power and 700 mA constant current, dimmable mains dimming (TRAILING EDGE-LEADING EDGE), input voltage 220-240 Volt. The product image may not match the description. Before buying, check the specifications.
Reference: 0056050A
Artemide Nesso, historic table lamp for indoor use. Designed by Giancarlo Mattioli, 1960.
Reference: 181221
CBU-PWM4 is a Bluetooth 4.0 controllable, Casambi enabled four channel PWM dimmer for constant voltage LED loads, such as LED strips and constant voltage LED modules. It is connected between a 12-24 VDC power supply and the constant voltage LED load.