

For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor
For other brands, spare parts, when available are displayed directly on the product page. If you can't find the spare part you need, contact us.
Living Room
Kitchen
Bedroom
Office
Outdoor











Wall and ceiling-mounted luminaire, designed for use with LED lamps and a patented, 360° blade effect optic. The product consists of a support base and screen. The base is made of phosphocromatization treated, die-cast aluminium, with a double base coat and passivation at 120°C. It is coated with liquid acrylic paint, cured at 150 °C to guarantee a high level of weather and UV ray resistance. The optic is made of methacrylate. All the screws used are made of A2 stainless steel. Each product must be connected to 1 driver.
Requires 450ma power supply in constant current and control unit to work correctly the all colors. For outdoor use with an IP66 waterproof rating.
Installation: Wall and ceiling mounted by means of a stainless steel wall fixture plate.
Wiring: Product supplied with an outlet cable L=200mm. Electronic ballast to be ordered separately.
Notes: Compatible with the Master Pro DMX control system.
Reference: 3.MZ53.013.0
iGuzzini Adjustable Base accessory for Trick Light Blade effect versions. Diameter Ø89mm, for indoor and outdoor environments.
Reference: 3.MZ73.004.0
DMX control panel with glass front that controls RGB and TW DMX luminaires in Plug & Play mode (check which models are compatible with this panel on the Product Book).
Reference: 3.MZ73.004.0
DMX control panel with glass front that controls RGB and TW DMX luminaires in Plug & Play mode (check which models are compatible with this panel on the Product Book).
Our team usually replies within 2 business hours.
Fill out the form below. We will reply to you by email as soon as possible.
Reference: LL128009N
Tok H400, outdoor bollard with IP66 water and salt spray resistant aluminum body with 360° lighting. Available in 4 colors and in three different light color shades.
Reference: 1254120A
Pirce, golden suspension lamp with dimmable integrated LED.
Reference: NEXI150-AT
Cooper-Eaton Emergency Lamp LED NexiTech 150lm SE AUTOTEST
Reference: F3175057
Flos IC S1, suspension lamp for indoor use, in the smaller version with a diameter of 200mm. Available in three finishes. Light source NOT included.
Reference: A40INTRGB40B
Dimmable 4-channel RGBW and 3-channel RGB 12V or 24Volt (150/300W) control unit interface with DMX or DALI input, PUSH with self-test function and signaling LED. With DIP-SWITCH for control selection.
Reference: PSTICK75827G2
10W LED tube stick light bulb with E27 screw fitting that replicates a 75W bulb with 2700k warm light. It expresses a luminous flux of 1055 lumens. Ideal for applications in small spaces and where a lot of light is needed.