

It is made up of an aluminium sheet shell housing the optical assemblies. The lamps are located on diecast aluminium rings directable through technopolymer universal joints (+/45° rotation with respect to the vertical and horizontal axes) - also permitting stablity of the angling system. The shell is fixed to the false ceiling (installation hole: 254 x 136 mm) through brackets located on a special adapter made from extruded aluminium.
Installation
The adapter, which makes it possible to mount the lighting body flush with the ceiling, is fixed to the false ceiling by self-tapping screws. After finishing the false ceiling, the shell can be installed.
Vorrei sostituire le lampade di 3 doppi faretti di questo tipo con lampade LED al posto delle alogene. Che lampade LED adatte avete a catalogo? Grazie.
Salve Settimio ,
può scegliere una di queste lampade in questa categoria :
Reference: 3.2960.001.0
Recessed luminaire designed for use with mains voltage sources.
Reference: 3.3574.039.0
High-brightness recessed spotlight for use with high-brightness 26W fluorescent lamps. Optical compartment made of thermoplastic material. The upper plate, in painted steel, acts as a heat sink optimizing performance.
Reference: 3.8318.039.0
Downlight designed for use with a 1x26W compact fluorescent lamp in the horizontal position.
Reference: 3.Q783.743.0
Laser Blade xs, tunable white recessed spotlight, available in three finishes and two versions.
Reference: 3.4245.001.0
Downlighter made up of a metal perimetric white rim and a painted sheet steel lamp compartment.
Reference: C00275CHNWF
iLed for Linea Light Nitum Q, square recessed spotlight made of brass. Available in four finishes and three colour temperatures. Power supply not included, can be purchased separately (see accessories).
Reference: 81717V15
iLed per Linea Light Suelo R walk-over floor recessed LED spotlight for outdoor IP68 round. Available in 2 different light colors and in three different light beams.
Reference: PROLRGB/100
Extension lead 4x0,50mm for BOX4RGB, BOX9RGB and RGB STRIPS. Available in two different lengths of 100 and 200 centimeters.
Reference: 127701
TCI STMP IP54 electronic ballast in constant current/voltage 700mA 6/8W 2...12V of very small dimensions with IP54 casing, suitable for installation in damp places or with water sprays. Dimensions: 52.5x46x26.5mm
Reference: VBL 38.8 3000K
Bulb R125 for Flos Parentesi LED 8W, which emits a luminous flux of 620 Lumens with warm light 3000K. Complete with E27 screw fitting, with opal white reflector. 360° light emission. Dimmable.
Reference: F3440030
Flos Goldman, table lamp with historical design, for indoor use. Complete with led source. Available in two finishes.Last pieces available for end of series.