

Downlight designed for use with a 1x26W compact fluorescent lamp in the horizontal position. Thanks to its professional optics the luminance of the reflector can be limited to values smaller than 200 cd/sqm with angles of observation greater than 60° with respect to the vertical axis (ref. CIBSE LG3 and DIN 5035 Teil 7 A60). Two brackets made of galvanized sheet steel are fixed to the die-cast aluminium perimetric ring to support the component box, also made from sheet steel. The lamp holder is fixed to the component box, which can be extracted from the fitting for easier maintenance. The superpure aluminium reflector is screwed to the fitting at the bottom.
Installation
Holes of 212 mm diameter for recessed installation. The brackets for fastening the support ring can be adjusted through sliders to fit false ceilings 1 to 30 mm thick.
Be the first to ask a question about this product!
Reference: 3.2960.001.0
Recessed luminaire designed for use with mains voltage sources.
Reference: 3.3574.039.0
High-brightness recessed spotlight for use with high-brightness 26W fluorescent lamps. Optical compartment made of thermoplastic material. The upper plate, in painted steel, acts as a heat sink optimizing performance.
Reference: 3.Q783.743.0
Laser Blade xs, tunable white recessed spotlight, available in three finishes and two versions.
Reference: 3.4245.001.0
Downlighter made up of a metal perimetric white rim and a painted sheet steel lamp compartment.
Reference: 3.4245.015.0
Downlighter made up of a metal perimetric rim and a painted sheet steel lamp compartment.
Reference: 3TL1.H22L.02
Oty Light Italo 01 wall lamp, made of aluminium. Available in five finishes. IP65.
Reference: ST8B18830800
Osram 9W SubstiTUBE Value led tube with 3000k warm light that emits a luminous flux of 900lm up to 30,000 of use. Energy savings of 65%. Instant ignition. Compatible with electromechanical ballasts. It works even at low temperatures
Reference: SD RAC075T
Slide Design Rap Chair, decorative armchair suitable for indoor and outdoor environments. Made entirely of polyethylene, it is available in a range of 13 standard finishes.
Reference: A40AL17Z4000
QLT 17mm LED chip operating at 350/700mA, available in four different light color temperatures.