Flos Casting Concrete outdoor bollard

When an architect like Vincent Van Duysen is involved in the design of gardens and exteriors, his response is consistent: he will only be able to create architecture. This version brings to mind the brutalist period, with its penchant for concrete, a simple shape that integrates into any environment.

Casting Concrete is made in a mould, with cast concrete composed of cement and reinforcing fibres. Each product is made individually with an artisanal process so minimal aesthetic and color differences between one fixture and another are a sign of the uniqueness of each lamp. Each luminaire is complete with a satin polycarbonate diffuser glued to the heat sink to ensure water tightness. It is supplied with a length of neoprene cable, an electrical connection kit for a single multi-core cable and with plugs for installation on solid and solid surfaces.

Casting Concrete has a height of 320mm, is complete with LED source and electrical power supply. Available in 2700K, 3000K and 4000K light temperature versions.

• Source: 9W LED
• Light temperature/luminous flux: 2700K - 650 lm / 3000K - 780 lm / 4000K - 800 lm
• NOT Dimmable
• Optics: 80°
• Driver: Included

NOTE:

- The use of a connection system with a protection degree greater than or equal to the protection degree of the appliance is recommended.

- During assembly and maintenance of the appliances, particular attention must be paid not to damage the surface finish.

- LED luminaires can show faults attributable to electrical stresses which affect the relative insulation with the triggering of destructive electric discharges.

- These stresses can arise from:

• overvoltages coming from the electrical power supply network of the system/devices.
• overvoltages of electrostatic origin (ESD) coming from the environment.

- We recommend installing a surge protection device on the electrical system which attenuates the intensity of some of these phenomena, protecting the equipment from irreversible damage. The choice of the most suitable device must be calibrated based on the characteristics of the system.