Flos Bellhop Bollard 850mm for outdoor

DALI dimmable power supply unit included. Ready for installation on a rigid base. Each luminaire is equipped with 20 cm of cable for connection inside the luminaire body.

Connection is recommended with an IP68 H2O Stop anti-condensation 2-way 4-pole junction system, to be ordered separately.

Available in the following colors: white, gray, anthracite, green, black, brown and stainless steel.

Material: Aluminum and stainless steel.

Bellhop wall luminous flux: 8W 2700K 551 lm - 8W 3000K 580 lm - 8W 4000K 607 lm.

Dimensions: Diameter x Height x Width | 55 x 850 x 73 mm

The lamp is set up with 8W 3000K (warm light) 580 lumen arrangement, dimmable DALI.

Other versions can be requested:

• 8W 2700K (warm light) 551 Lumen, dimmable
• 8W 2700K (warm light) 551 lumens, not dimmable
• 8W 3000K (warm light) 580 lumens, not dimmable
• 8W 3000K (warm light) 580 lumens, dimmable
• 8W 4000K (neutral light) 607 lumens, dimmable
• 8W 4000K (neutral light) 607 lumens, not dimmable

Notes: During the assembly and maintenance of the devices, special care must be taken not to damage the powder coating. Combined damage to the action of water could cause corrosion. Chemicals damage the corrosion protection. LED luminaires can show faults attributable to electrical stresses affecting the relative insulation with triggering of destructive electrical discharges. These stresses can arise from:

. overvoltages from the power supply network of the system / devices.

. overvoltages of electrostatic origin (ESD) from the environment. We recommend the installation of a surge protection device on the electrical system that attenuates the intensity of some of these phenomena, protecting the appliances from irreversible damage. The choice of the most suitable device must be calibrated according to the characteristics of the system.

Degree of protection IP68. Insulation class I.