

LED power supply in constant voltage 60W max at 12Vdc dimmable (5 in 1) with Phase dimming: work with Forward phase, MLV and Reverse phase, ELV, TRIAC dimmers. 0-10V dimming: 0-10V/1-10V/Potentiometer/10V PWM 4 in 1. Dimming range: 0-100%. Available at 200-240V and 100-277V. Dimensions: 178x61x24mm.
Characteristics:
Download the pdf for all additional information and assembly instructions in all different control modes.
Be the first to ask a question about this product!
Reference: KVG-12060-DH
Dimmable power supply for LEDs in constant voltage. Output power 60w 12 volts.
Reference: KVG-12500-DH
500W 24V constant voltage LED power supply dimmable Triac, 0-10V, 1-10V, potentiometer, 10V PWM. Input voltage 220-240V. Dimensions: 322x78x43.7mm. For outdoor use IP67
Reference: KVG-24500-DW
Constant voltage LED power supply 500W at 24V dimmable Triac, 0-10V, 1-10V, potentiometer, 10V PWM. Input voltage 100-277V. Dimensions: 284x109x48.5mm. With NFC regulation via application, instructions attached. Power supply also for outdoor use IP66 waterproof.
Reference: KVG-48060-DH
Constant voltage LED power supply 60W, 48V.
Reference: DOORSENSOR1BI
Sensor for doors, leaves, shelves for chip led model or strip led ON/OFF 12-24V with 2 modes of operation. Available in two versions.
Reference: REELCOB13WIP20BC
COB LED strip 13W per meter at 24V, 5 meters long, cut every 50mm. The peculiarity of this strip is the continuous light COB that wraps around the entire surface, so as to create uniform light across the entire width of the profile.
Reference: ACCNACQ.0X445
Cini&Nils single dimmable switch round ceiling canopy available in a classic version and an off-centre version, in three colour finishes. Compatible ONLY with Acqua suspension lamp.
Reference: WAP358450
Original Artemide replacement accessory, for Tolomeo MICRO LED.
Reference: HLG-100H-54B
Mean Well driver with 96W power, 1.77A constant voltage, 54Volt. IP67 protection degree suitable for indoor and outdoor use. 3 in 1 light regulation dimmer function with 1~10VDC signal, or 10V PWM.
Reference: LD035001
Ceramic cover lampshade for Poldina Pro, Poldina Pro Mini, Poldina Reverso and Poldina USB lamps. Attachment with magnet. Available in five versions.