Bot Lighting Moon solar outdoor led wall lamp

Outdoor polycarbonate wall light with twilight sensor and PIR presence detector

OPERATION

Press and hold the button for about 2 seconds to turn the projector on and off. Press it again to switch from one operating mode to another. When turned on for the first time, the appliance will turn on in mode 1.

MODE 1: The projector will remain on at 100% output from dusk to dawn or until the battery charge runs out.

MODE 2: The projector will remain on at 25% output from dusk to dawn or until the battery charge runs out.

MODE 3: The projector will remain on at 10% output from dusk to dawn or until the battery charge runs out. When movement is detected within a radius of 1-5 meters it will turn on at 100% output and will remain on for 30 seconds following the last movement detected

MODE 4: The projector will remain off. When movement is detected within a radius of 1-5 metres, it will turn on at 100% output and will remain on for 30 seconds following the last movement detected.

Characteristics:

• Available colors: White - Black
• Easy Installation: Does not require connections to the electrical network
• 4 operating modes
• LED light source: 5.2W
• Luminous flux: 1000lm
• Light color temperature: 4000K neutral light
• 270° light beam
• For outdoor: IP54
• Sensors: Twilight and movement
• Dimensions: 151 x 137 x 130mm
• Emission: Single
• Lithium ion battery 3.7V, 2000mAh, 7.4Wh
• Protected in class 3

For more information, see the attached PDF.