Bot Lighting Marbella10sun solar spotlight for outdoor use

Marbella10sun is a cube-shaped solar wall light made of aluminum with an adjustable up and down double emission glass diffuser and an outdoor solar panel. It is easy to install, as it does not require connection to the mains. The battery is a 3.7V-2600mAh, 9.62Wh lithium-ion battery. It has a graduated scale for manual adjustment of the up and down beam width, adjustable from 0° to 90°. Equipped with a twilight sensor and presence detector.

Operation:

On the back of the device there are 4 selectors for setting the solar floodlight according to your preferred parameters: CCT, activation threshold, switch-on time, and operating mode. Switch-on time: 20-120 seconds.

- Solar charging time: 8 hours, cable charging time: 4 hours

- Includes 1m USB-C power cable (power adapter not included)

Operating modes:

- OFF: device switched off

- ON: device always switched on at 25% light output if the ambient brightness is below the set threshold

- AUTO: when the ambient brightness is below the set threshold, the device will turn on at 100% light output when movement is detected within the sensor's detection range. It will turn off after the previously set switch-on time has elapsed since the last movement detected

- DIM: when the ambient brightness is below the set threshold, the device will turn on at 100% light output when movement is detected within the sensor's detection range. It will switch to 5% light output after the previously set switch-on time has elapsed since the last movement was detected.

• Source: LED
• Power: 9W
• Intensity: 1000lm
• Activation threshold: 5-30 lux
• Adjustable beam: 0° -90°
• Light color temperature: CCT 3000K-4000K-6000K
• Dimensions: 100x100x100 mm

For more information, please refer to the attached PDF.

Marbella10sun can be installed on a pole. See accessories.