

Single-emission recessed spotlight for outdoor applications, designed for immersion. Equipped with an LED light source with General Lighting distribution, consisting of a powerled LED with CRI 80, the spotlight offers a luminous flux of 227 lm and an efficiency of 227.0 lm/W. The luminaire body, made of stainless steel with a peened finish, guarantees strength and durability. With IP68 protection, the spotlight is resistant to dust and continuous immersion in water. The total weight is 0.168 kg. The power driver is not included and must be ordered separately. The power consumption is 1.5 W. The power cable is included. The luminaire has an insulation class III and can be installed on walls, ceilings or masonry floors, using the counter housing code 98060 or 98148 for immersion applications.
On request version with spot beam, medium or wide or very wide.
Reference: A40NICE2060B
miniaturized constant current power supply unit, 500mA 10,5W Max.
Reference: A40RP315000N
500mA constant current resin power supply with a watertight degree of protection for the exterior of IP65. With an output power of 22W (45V). Ideal for a minimum of 3 to a maximum of 10 leds in 220 Voltage, in 110V a maximum of 7 LEDs.
Reference: A40MPI1011WN
Power Supply for LED constant current max 6V 350mA 1,5W waterproof IP66 for outdoor use.
Reference: 98148
iLed for Linea Light Housing diameter 33 mm for iled spotlights to be used even under water.
Reference: 98060
iLed for Linea Light Housing diameter 33 mm for iled spotlights
Reference: 99185
iLed for Linea Light Aqualed power supply unit for 6-12 constant current modules for LEDs of 500mA 20W MAX. Nominal output voltage DC (under load) 17-40V.
Reference: 99181
iLed for Linea Light Aqualed power supply unit for 3-6 constant current modules for LEDs of 500mA 9W MAX. Nominal output voltage DC (under load) 9-20V.
Be the first to ask a question about this product!
Reference: 3.X584.004.0
Plastic outer casing for floor installation with closing caps and joint for continuous line Lun-Up Evo projector
Reference: S310/NE
Adjustable spotlight with wall base, with E27 socket for LED bulbs. For installation on any surface. Available in white, black and chrome.
Reference: 15320
Seletti Innerglow, resin led floor lamp for indoor use.
Reference: C2646(MIX)
Afoxe' suspension lamp made of ceramic and glass. Ideal for indoor installation. Available in multiple variants.
Reference: E330IP54MC
Tricolor Led ceiling or wall light 25W 230V IP54.
Reference: L3319 NE
Designer: Joe Colombo (1965) Oluce Spider 3319 floor lamp with direct light, with vintage and retrò design. Laquered metal base, chromium-plated stem and laquered aluminum reflector, swiveling and adjustable.