TCI Mini LED Driver Professionale square DALI 38 NFC dimmable

Product Information:

Driver for built-in use.

It can be used for lighting equipment in protection class I and II. Active Power Factor Corrector.

Current regulation ±5 % including temperature variations.

Input and output terminal blocks on opposite sides

(wire cross-section up to 1,5 mm2 / AWG15).

Driver can be secured with slot for screws.

Protections:

- against overheating and shor t circuits;

- against mains voltage spikes;

- against overloads.

Thermal protection = C.5.a.

Selection of the output current :

3W Min - 38W Max  10 ... 48V max 300-1050 mA constant.

Operation Mode:

• WIRELESS PROGRAMMING through NFC antenna.

• Programmable features:

- output current setting, step 1mA;

- PUSH-SWITCH (enable/disable);

- Password (lock/unlock programming).

• Compatible with standard DALI interfaces.

• Features DALI dimming (0/1 - 100 %, minimum output current 7 mA):

- memory function for sets or light groups;

- recall of stored functions.

• Dimming method is AMPLITUDE.

• Light regulation 0/1 - 100 % by means of PUSH SWITCH function (mains voltage):

- a short push to turn on and off;

- a longer push to increase or decrease light intensity;

- regulation automatically stops at minimum and maximum values;

- for another on, regulation or off command, release the push button and give the desired command again;

- dimming level memory at mains restore.