- On sale!
- Discount from
-65%

Electronic ballast for discharge lamps, independent use with double terminal cover, with Wieland (ST-18) connector 220-240V 50 / 60Hz, for 35W or 70W metal halide lamp.
Code: 183245 - EPC 35/2 Socket (35 W) : G12 - PG12-2 - G8,5 - E27 - EAN 8010703250178
Code: 183246 - EPC 70/2 Socket (70 W): G12 - RX7s - PG12-2 - G8,5 - E27 - EAN 8010703250185
. Electronic ballast for independent use, class I.
. It can be used for lighting equipment in protection class I and II.
. Degree of protection: IP20.
. Energy efficiency: A2.
. Allowed load capacity: 20 - 120 pF.
. Maximum cable length for connecting the lamp: 1 m.
. Operating frequency: 173 Hz.
. Input and output terminal blocks on the same side with push-wire connections lever opening 0,75 - 2,5 mm2.
. Ballast can be secured through slots for screws M4.
. Shielded against radio interference.
. 50% increase on the life of the lamp.
. Energy saving up to 25% compared to the use of conventional ballasts.
. The electronic ballast has to be wired with silicone double insulation cable with core suitable for 5 kV pulse.
. Protection against overvoltage.
. Protection against disconnection of the lamp.
. Protection against lamp failure.
. Protection in case of lamp end of life.