Diffusioneshop.com offers power supplies, transformers, ballasts, control units for RGB and white LED strips, occupancy sensors and brightness for LED strips . The power supplies, voltage 12v / 24v / 48v are suitable for LED strips and LED modules controlled DC voltage, the power supplies in constant and variable voltages are suitable for modules and current controlled LED chip (350 mA, 500 mA, 700 mA, 1000 mA). To choose the right power supply voltage is sufficient to check the working voltage of the module or installed LED strip / s and check the total power consumption. For constant current power supplies and sufficient to verify the quantity of modules or LED chips installed in series and choosing the right controller (for example, whereas you have installed 4 350mA 1w LED modules with a single supply voltage of 3.2 / 3.4 V work You will have to choose a power supply with constant current output 350 mA and working voltage 3.4 x 4 = 13.6 V). Our reference brand is Mean well . Meanwell is the world's number 1 leader in power supplies and electronics for what regards quality production quantity and choice of models in the catalog.
Flos dimmer rondò plus on / off switch for LED or halogen bulb of the flos Parentesi lamp. Complete with E27 screw lamp holder and plug as in the photo. Electronic regulator for dimmable halogen and LED bulbs, 100-240V.
Philips electronic ballast 1x58w. Dimensions: 280x30x28mm
Interface dimmer for DALI BUS (9-26V) for home automation Domotic, allows to create a DALI line to control compatible devices and accepts dimming via the 0-10V or 1-10V button. TIMER function 3 minutes. Use cable
Lampo Wifi controller kit for LEDs or RGB strips of 12V (144W Max) or 24V (288W Max). The kit includes power cable and RGB LED strip connection cable. No need remote control, possibility to manage via smartphone APP or
Intelligent Rotary knob smart Dimmer interface with the latest generation Zigbee 3.0 protocol with a wide input voltage 100-240V for the management of the trailing edge signal (phase cut). It allows you to control the
Intelligent interface with the latest generation Zigbee 3.0 protocol and high volatge push (8-230V) to manage trailing edge (phase cut) signal. Via button (Switch), remote control, Application on the phone by Philips
DALI dimmable power supply 24W 24Volt, for outdoor use IP67 waterproof. Dimensions: 135x33x35mm
Ferromagnetic ballasts for 400W HS and HI lamps. Dimensions: 75x72x165 mm For high pressure sodium lamps (HS) and metal halide lamps (HI).
Ballasts for HS and HI Lamps 1000 W. Shape: 92x102 mm For high pressure sodium lamps (HS) and metal halide lamps (HI).
Dimmable electronic ballast for 1% to 100% dimming. For lamps T5 linear fluorescent tubes of 28W or 54W with a diameter of 16 mm with high luminous efficiency.
12 ÷ 24VDC 3 x 2A interface and receiver for 12 / 24V multifunction infrared system. Complete with lens that mounts in 35 mm MR11 recessed spotlights. Range 10 meters max.
Controller, 36 Khz remote control for 12 / 24V multifunction infrared system. Complete with four buttons for controlling all functions: On / Off, RGB colors, white, cyclic rotation, speed and intensity. Range 10 meters
Dimmer controller with rotary system, ideal for regulating light intensity and managing 12 / 24V or 230V systems. Brightness adjustment via central rotary switches, ON-OFF button included. Recessed or surface mounted
Dimmer controller with touch system, ideal for adjusting light intensity and managing 12 / 24V systems. Brightness adjustment via TOUCH ring, ON-OFF button included. Recessed or surface mounted with special kit to be
RGB controller with touch system, ideal for adjusting light intensity and managing colors in different scenes of 12 / 24V RGB systems. Recessed or surface mounted with special kit to be purchased separately. Dimensions:
AIRAM Wireless starter kit set with HUB remote control and a 4.8W GU10 LED bulb that develops 385 lumens with 2700K warm light, dimmable. Operation is based on the ZigBee 3.0 protocol. The control range in the open area
To be built in IP20 - Insulation Class 2 Self resetting protection against failed or broken lamps Lamp ignition with pre-heated cathods No flickering noises Input voltage: 190-240V AC or DC
Recessed rotary dimmer available for different recessed series suitable for regulating dimmable LED bulbs of the best brands on the market (the applicable power is equal to a minimum of 4W to a maximum of 160W) and
Universal dimmer dimmer for LED, incandescent and halogen lamps with LED light indicating power presence. In thermoplastic material. Max 4 adjustable LED lamps, for a minimum power of 4W and a maximum of 25W. Halogen and
Dimmable electronic MICRO MD power supply with IGBT and TRIAC (TRAILING EDGE-LEADING EDGE) system in compact format, in direct current 500mA for a maximum power of 10W. Rated input voltage 240V. Power supply with
MINI MD electronic dimmable power supply with IGBT and TRIAC (TRAILING EDGE-LEADING EDGE) system in compact format, in direct current 500mA for a maximum power of 21W. Rated input voltage 240V. Power supply with ten-year
Universal dimmer controller for 110V LED lamps and spotlights, for a maximum output load of 100W. Cod: RF22227-USA
Motion detector with microwave sensor (5.8 Ghz), able to overcome obstacles such as glass, doors or thin walls, equipped with adjustment of the distance from 3 to 10 meters, the time from 10 seconds to 15 minutes and the
Electronic ballast for discharge lamps, independent use with double terminal cover, with Wieland (ST-18) connector 220-240V 50 / 60Hz, for 35W or 70W metal halide lamp. Code: 183245 - EPC 35/2 Socket (35 W) : G12 -
Direct current electronic driver in SLIM format 500mA 14W max. Rated input voltage 100-240V. Power supply with 10-year warranty. Flos reference code: 60.8880
Direct current electronic driver 350mA 15W max. Rated input voltage 100-240V. Power supply with 10-year warranty.
Driver: OPTOTRONIC INTELLIGENT OTi DALI 10/220-240/700 NFS Mains frequency 50 ... 60 HzInput voltage 198 ... 264 V DC voltage ( DC ) 176 ... 276 V Efficiency 82 % Constant output current: 150 - 700 mA Output
Electronic power supply 75W in 24Volt in direct current for LED strips and modules. For indoor use
Osram Optotronic OTe DALI LED power supply driver 18/220-240/500 PC.Constant output current: 500 mA MAX 18W output
Driver: OPTOTRONIC INTELLIGENT OT DALI 50/220-240/1A4 LT2 FANMains frequency 50 ... 60 Hz Input voltage 198 ... 264 V DC voltage ( DC ) 176 ... 276 V Efficiency 91 % Constant output current: from 600 to 1400 mA
Mains frequency 50 ... 60 Hz Input voltage 195 ... 264 V DC voltage ( DC ) 176 ... 276 V Constant output current: 350 - 1050 mA
Semi-transparent 12-24V on-off touch sensor of small dimensions, particularly suitable for applications with LED strips. Fixing with double-sided adhesive. Internal cable length 10 cm and external 150 cm. Dimensions: 7 x
Electronic dimmer with radio-frequency 12-24V coded remote control for a maximum of 96W at 12V and 192W at 24V. Ideal for LEDs. Maximum Reception Distance of 10 meters. IP20 protection degree for indoor use. Dimensions:
ON / OFF sensor with 2 operating modes, working 12-24V for a maximum of 15W at 12V and 30W at 24V. Ideal for LEDs, use in furniture doors to turn the light on and off automatically. Cable length 250 cm. IP20 protection
On-off proximity touch sensor + Switch in 230V for a maximum of 250W. Black color. Ideal for strips and LED modules. Cable length 2 meters + connection to the switch. Degree of protection IP20. Built-in hole 13 mm.
Recessed touch dimmer sensor operating at 12-24V for a maximum of 60W. Blue circular LED light on / off on the top. Ideal for strips and LED modules. Including AMP / JST adapter. Cable length 2 x 150cm + AMP (plug).