The company and its production
A commitment to research and innovation in a highly qualitative context, and a great capacity for customer service from QLT.
The company and its production
A commitment to research and innovation in a highly qualitative context, and a great capacity for customer service from QLT. Today Qualitron Archimede Elettronica is one of the leading producers in the field of lighting electronics. It operates from a complex of six thousand square metres in Rescaldina, fifteen kilometres from Milan on the motorway towards Varese. Piero Magnaghi, an expert in the field of electronics, founded QLT in 1986 and is still the technical director of the company. He is responsible form motivating and coordinating the work of a large and highly qualified staff that takes care of design, planning and production. QLT’s range of products – all deigned by its own engineering department – is wide and varied and covers all the sectors of electronics applied to lighting: electronic transformers for low voltage lamps, electronic ballasts for fluorescent lamps, extra-flat electronic lamps, movement detectors and light-dimming technology. These lines of transformers and electronic ballasts absorb a production of over two million pieces per year, almost all of which are exported, directly or indirectly, to the more developed European markets. Playing a part in this success trend is the new power technology and the numerous applications of LEDs, offered to the many Custom-OEM throughout Europe and unanimously agreed to be the future of a certain type of lighting. QLT’s innovative strength is backed up not only by a top-rate productive structure but also by a strong commitment to researching new technological solutions and new products. In fact the firm invests more than fifteen percent of profits in this area.
Constant current power supply unit for 350mA 11W leds 35V.
Small 500mA constant current resin power supply, with a waterproof protection for the outdoor of IP65. With a power of 8,4W 18V in 220V. Ideal for a minimum of 1 to a maximum of 4 leds in 220 Voltage.
Small 350mA constant current resin power supply, with a waterproof protection for the outdoor of IP65. With a power of 10.5W 35V in 220V (8.4W-110V). Ideal for a minimum of 1 to a maximum of 9 leds in 220 Voltage, in
Round electronic resin pvc transformer, for 20 to a maximum of 70W at 12V low voltage. Suitable for IP65 outdoor installation. Protection against short circuits and overvoltages. Ideal for LED lamps.
Radio Transmitter 433 Mhz RGB / Color / Temperature Control / Dimmer • It controls WI-FI controllers and PDL43 range • Available in 3 versions: RGB, color temperature control and dimmer • Input: batteries 3 x AAA
230 v For bulbs E40 with neoprene cables
G12 lampholder made in ceramic 35-70-150W
DMX-DALI to PWM RGB converter
Nice power supply 110 10.5 W 350mA
80/98V For bulbs GX8.5 Metal halide
output 3 x 24V 0.7A output power 55w controllable with DMX, button or ir
3-12 led 1w 350mA Constant current 350 mA
RGB and RGBW 10-100w No separate power supply is required control unit Controllable with DMX / DALI / PUSH
Converter current power supply required Max input voltage 3x 24 V DC , output 3 x 350 MA
IP66 protection Output 24 V DC Output current 2,5A Input voltage 190-230V
Complete code A40RC433RGBN + A40PDL43RGBB Radiocontroller wifi 433 Mhz + Receiver 433 Mhz for adjust strip led brightness 12-24 V DC IN RGB
Stabilized 24V output Dimmable with button Output power 50 watts with 230V in
DMX512 converter -> DALI For QLT RGBOX30 / 35 DIP SWITCH Addressing
Power supply 24V 60w dimmable 1-10V
RGB Amplifier Input voltage 12-24 V DC Increases the current of the rgb system
Driver for LED modules For indipendent use - IP20 - Insulation class II Steady voltage output, ± 5% Self-resetting protection against overtemperatures, against open circuit and against output short circuits Input
Indipendent driver - IP20 - Isolation's Class Output in constant current 350mA, +/-10% Self-resetting protection against overtemperatures, against open circuit and against output short circuits Input voltage:
24V power supply for a maximum power of 19W. Dimensions: 138 x 40 x 28.5
350 mA power supply 4,2W IP65 dimmable with IGBT dimmer voltage output 3 - 12 VDC
Indipendent driver - IP20 - Isolation's Class 2 Output in steady voltage and current +/-10% Self-resetting protection against overtemperatures, against open circuit and against output short circuits. Input voltage