Luminaire with direct wall-washer emission designed for use with LED sources. RGB with multicolour 21Wmax 15 RGB (Red, Green and Blue) LEDs circuit, optic with plastic lenses, Flood version. Complete with lamp and Dali 48÷56Vdc control board. Electronic ballast to be ordered separately. Extruded aluminium body subjected to phosphochromatisation treatment, double primer, passivation at 120° C, diecast aluminium end caps with 50/60 Shore A silicone gaskets subjected to postcooling treatment at 200°C C. Acrylic liquid paint finish with high resistance to atmospheric agents and UV rays; baking at 150°C. The optical assembly is closed with sodium-calcium tempered transparent clear semi-acid finished glass with antislip properties (in compliance with R12 class according to DIN 51130), 4mm thickness, fixed with silicone. Alluminium outer casing for installation with technopolymer caps to be ordered separately Ready for through wiring by means of four PG11 nickelplated brass cable clamps suitable for ø 6.5÷11mm cables contained in two thermoplastic boxs fixed to the optical assembly. All external screws are made of stainless steel A2.
Mean Well power supply unit with power of 96W from 2A constant voltage of 48Volt. Degree of protection IP67 suitable for indoor and outdoor use. 3 in 1 light dimmer function with 1 ~ 10VDC, or 10V PWM signal.