Shipping cost
| Carrier | Shipping estimates | Final price |
|---|
| Carrier | Shipping estimates | Final price |
|---|
English
Italiano English
There are 0 item(s) in your cart
No product in shopping cart
Wall/floor recessed lighting fitting...
 "iGuzzini 2960.001 Deep Frame Minimal White 2x75W E27")
$ 204.25
$ 255.32
20%
Wall/floor recessed lighting fitting flush with the surface designed for white one-colour LED light sources with safety low voltage (insulation Class III) for the production of signalling light.The round body is 60 mm in diameter. It is made of high-resistance thermoplastic material with extraclear sodium-line surface glass with no visible screws.
Wall/floor recessed lighting fitting flush with the surface designed for white one-colour LED light sources with safety low voltage (insulation Class III) for the production of signalling light.The round body is 60 mm in diameter. It is made of high-resistance thermoplastic material with extraclear sodium-line surface glass with no visible screws.
The stainless-steel lower ring is fixed to the diffusing glass. The whole assembly is supported by four AISI304 stainless-steel turned fixing elements. The fitting is fixed to the outer casing by means of special retention springs for anchoring purposes. A stainless-steel top collar flush with the surface is fixed to the outer casing.In order to wire the product an M14x1 A2-stainless-steel cable and an outgoing power-supply cord (L = 300 mm) type H05RNF 2x1 mm² are used. The cable is equipped with an anti-transpiration device (IP67 Patented) made up of a resin-coated gasket located along the power-supply cord.Two different types of outer casings are available for installation. They can be ordered separately from the optical assembly and come complete with closing plug. You can choose between a diecast-aluminium barrelshaped outer casing for wall/floor installation and a plastic cylindrical outer casing for wall/floor installation. Easy installation and perfect flush application are ensured by two different types of adapters made of polypropylene thermoplastic material for barrelshaped or cylindrical outer casings respectively.The fitting permits creating preset light scenes by means of the control device Effect Equalizer.The unit made up of glass, optical assembly and outer casing ensures resistance to 500-kg static load with protection degree IP68 IK08.Maximum glass surface temperature is lower than 40°C.
Installation
The product is fixed to the outer casing by special locking springs and is pulled out by means of a suction cup without any other tools. The fitting can be easily inspected and it makes the replacement of the LED circuit or the introduction of accessories possible. It can be recessed into the wall or floor by an installation outer casing.LED
About availability :
-> PRODUCT WITH QUANTITIES INDICATED -> Products are available in our warehouse and are ready for delivery.
-> NO LONGER IN STOCK -> Product is in out of production or no longer available from the supplier .
-> AVAILABLE ON ORDERING -> The products will be ordered from the supplier and if not indicated the waiting times vary from 5 to 15 days
Can't find your answers or information? For international customers there is an available phone number for your questions: +390541657672 , phone operating from 8.30am - 6.30pm monday - friday.
| Input voltage | 24 V AC/DC |
| Depth in mm | 82 |
| Diameter in mm | 60 |
| Degree of protection | IP68 |
| Material | Steel |
| Light source | LED |
| Average hours duration | 50000 |
| Glass | Opal |
| Watt power | 0.7 W |
| Luminous efficacy in lumens | 28 |
| Light Temperature | 6000 K |
| Number of light sources | 1 |
| Driver power supply | Without driver |
| Formwork | No |
Per usufruire dell' iva agevolata negli acquisti effettuati sul nostro negozio online www.diffusioneshop.com , è necessario scaricare e compilare il modulo sotto allegato . E' possibile usufruire dell' imposta agevolata sugli acquisti al 4% oppure al 10% .
Per effettuare un ordine con agevolazione al 4% utilizzare il codice: iva4 .
Per effettuare un ordine con agevolazione al 10% utilizzare il codice: iva10 .
Inserire il codice nel campo buono sconto durante la fase di acquisto .
Per essere convalidato l' ordine con l'imposta agevolata , è necessario inviare all' indirizzo email diffusioneluce@diffusioneshop.com il modulo pdf compilato in tutte le sue parti indicando il numero di riferimento del vostro ordine .
Built-in RGB fixture for exterior lighting with power LED. Body made of die-cast aluminium AISI 316 turned-steel front. The fixture has a secondary lens for maximizing the light flow. Transparent glass front and 100cm
Built-in fixture for exterior lighting with power LED. Body made of die-cast aluminium AISI 316 turned-steel front. The fixture has a secondary lens for maximizing the light flow. Transparent glass front and 100cm
Built-in fixture for exterior lighting with power LED. Body made of die-cast aluminium AISI 316 turned-steel front. The fixture has a secondary lens for maximizing the light flow. Transparent glass front and 100cm
Light source: LED Power: 2W Luminous beam: 10° Luminous flux: 210 lm Voltage: 500 mA MAX Finish: Inox steel Color temperature: 3000K Diameter 2,7 cm Formwork Included
LED 1W 5° 3000K Warm white Driver 350 mA (not included) IP44 White aluminum 40x26x26 mm
LED 1W 113 lm 30° 3000K Luce calda Driver 350 mA (not included) Finish White 40x24.5 mm
LED 1W 130 lm 30° 3000K Warm light Driver 350mA (not included) Finish Brushed Nickel Outdoor IP66 35x23 mm
LED 2W 170 lm 3000K Diffused Warm light Driver 630mA (not included) Finish Brushed Nickel Outdoor IP67 70x70 mm
LED 2W 208 lm 3000K 30° Warm light 630 mA Finish Nickel IP67 Walkable (NOT carrable) Diameter 35 mm
Single emission uplights for indoor application. The warm white LED light source with a general lighting light distribution is composed of 1 powerled LEDs with CCT of 3000 K and a CRI 80; the source luminous flux is 66
Spotlight spotlight nickel 1w 3000k ip 44
Recessed downlight LED 2W 3000K IP44 White
Recessed downlight LED 2W 3000K 45° IP44 White
Single emission Uplights for outdoor application. The natural white LED light source, with Flood light distribution, is composed of 1 powerled LEDs, with a CCT of 3000 K and a CRI 80; the luminous flux of the source is
LED 1W 130 lm 30° 3000K Warm light Driver 350mA (not included) Finish Steel Outdoor IP66 35x23 mm
LED 1W 130 lm 60° 3000K Warm light Driver 350mA (not included) Finish Steel Outdoor IP66 35x23 mm
Low voltage 2W LED spotlight that emits a luminous 149 lumen flux that can be installed on the wall, floor or ceiling. Warm light tone at 3000K, with an opening beam of 30 °. In the formwork version available in our
LED 0.7W 6000K 28 lm Optic Signaling Adjustability Fixed Material Glass Dimensions 60x60x82 Weight 0,25 Kg Indoor or outdoor use IP68
Wall-, ground- or garden-recessed luminaire, designed to use Warm White 3100K LED. For use as an indicator. The product consists of the body, closing glass, frame and outer casing (available upon request). The small
IP65 recessed LED spotlight walkable for outdoor use. 3W led powered at constant voltage of 12V through converter not included. Made of aluminum. 60 ° light beam opening.
IP68 recessed outdoor LED floodlight in aluminum and stainless steel. Available in three different power 3, 6 and 9W and different sizes, powered by a constant voltage of 12V via converter not included. Formwork
Recessed LED spotlight with eyelid with a power of 1W with a 45 ° aperture beam. Luminous flux of 120-130 lumens depending on the light color chosen. 350mA constant current. Ideal for outdoor use with an IP66 degree of
Ground recessed light 3W in 12V LED for outdoor use IP67, in aluminum and stainless steel. Three interchangeable lenses are included inside the spotlight, narrow beam (15 °) medium beam (30 °) wide beam (60 °). Available
Available in 2 variants: 3000K ° 230 Lumen 4000K ° 250 Lumen
Light source: LED Power: 2W Luminous beam: 30° Medium Luminous flux: 190 lm Voltage: 500 mA MAX Finish: Inox steel Color temperature: 4000K Diameter 2,7 cm Formwork included
Outdoor die cast aluminium-recessed lamp 2W led with warm light 3000K. Polished AISI 316 steel front sleeve. Transparent protection glass. PMMA lenses. Including 50cm neoprene (H05RN-F) cord.
Built-in fixture for exterior lighting with power LED. Body made of die-cast aluminium AISI 316 turned-steel front. The fixture has a secondary lens for maximizing the light flow. Transparent glass front and 100cm
LED Ground recessed downlight for outdoor IP67 drive-over in corrosion-resistant anodized aluminum. Available from 3W powered at 12Volt DC low voltage with a luminous flux of 230-250 lumens with an opening beam of 45 °
Recessed LED Ground light with lateral emission eyelid for outdoor IP67, drive-over in corrosion-resistant anodized aluminum. Available from 3W powered at 12Volt DC low voltage with a luminous flux of 230-250 lumens.
Recessed LED Ground light with lateral three-beam emission for outdoor IP67. Drive-over in corrosion-resistant anodized aluminum. Available from 3W powered at 12Volt DC low voltage with a luminous flux of 230-250 lumens.
Light source: LED Power: 2W Luminous beam: 30° Medium Luminous flux: 210 lm Voltage: 500 mA MAX Finish: Inox steel Color temperature: 3000K Diameter 2,7 cm Formwork Included
Light source: LED Power: 2W Luminous beam: 10° Narrow Luminous flux: 190 lm Voltage: 500 mA MAX Finish: Inox steel Color temperature: 4000K Diameter 2,7 cm Formwork included
Light source: LED Power: 2W Luminous beam: 10° / 20° / 30° Luminous flux: 190 lm Voltage: 500 mA MAX Finish: Inox steel Color temperature: 4000K Diameter 2,7 x 2,7 cm Formwork included
LED 0.7W 6000K 28 lm Optic Signaling Adjustability Fixed Material Glass Dimensions 60x60x82 Weight 0,25 Kg Indoor or outdoor use IP68
IP68 waterproof 8 LED - 0,9 W IK 10 - max 1000kg
Carriageable and walk-over downlight in # 304 stainless steel with an IP65 protection rating for outdoor use. Complete with don formwork dimensions: ø103mm H120mm, for brick or ground installation. Bulb socket with GU10
LED 3W 260lm - light source value 4.5W 179lm - system values i Luminous Efficiency (system value): 39lm/W 3000K CRI 80 Optic: M - Medium 24° Adjustability: rotation and tilt updown Material: stainless steel Size
Code: 169 Box formwork for installation ø 105 H 78 mm For in-ground installation or concrete wall.
LED 2W 208 lm 3000K 30° Warm light 630 mA Finish Nickel IP67 Walkable (NOT carrable) Diameter 35 mm
Flos Arco since 1962 
Flos Infra-Structure Episode 2
Christmas lights