Loading...
Electronic and electromechanical ballasts for fluorescent neon discharge lamps, or sodium and metal halide vapors. Multi power electronic ballasts for classic 36 / 58w tubes or for slim 21w / 28w / 39w / 54w fluorescent tubes. The choice of the electronic ballast is always preferable to the electromechanical ballast, as it guarantees a longer lamp life and a lower flicker, in addition to an efficiency in higher consumption. Unique against electronic ballast indication concerns the ignition phase, in fact the electronic regulators have a very low trigger time and this brings all the transformers to turn on at the same time. In systems with below-rated protection circuit-breakers, a trip may be triggered by the thermal-magnetic protection device. Brand leaders in the market are Philips and Osram.
TiTimed power supply unit for 35W metal halide (HI) and sodium vapor (HS) and (HM) mercury vapor lamps, independent use. Dimensions: 64x72x175 mm.
Timed power supply unit for 150W metal halide (HI) and sodium vapor (HS) and mercury vapor (HM). Dimensions: 64x72x214 mm.
TCI multi-lamp ballast and MBQ 242/2 electronic power for lamp 1 / 2x26 1 / 2x26-32 1 / 2x42 1x57 1x70 1x22 + 1x40 1 / 2x22-40 for independent use for fluorescent lamps. The product does not include the cable cover, as
Huco electronic ballast for one or two bulbs of 2x26W - 2x32W (TC-DEL/TEL), 2x18W - 2x24W (TC-L/F), 2x22 / 1x22/40W (T16-R) Dimensions: 123x79x33mm. For fluorescent lamps.
Osram ballast 220-240Volt Quicktronick QTIS Instant Start electronic for two 2xL36W bulbs. Dimensions: 359x31x28mm. For fluorescent lamps.
Huco EVG-HP electronic ballast for one or two bulbs of 1/2x26W - 1/2x32W - 1/2x42W. Dimensions: 123x79x33mm. For fluorescent lamps: PL-T, PL-C and PL-R (TC-DEL/TEL).
Philips HF-PERFORMER electronic ballast for two bulbs of 2x26W - 2x32W - 2x42W. Dimensions: 123x79x33mm. For fluorescent lamps: PL-T, PL-C and PL-R.
TCI Mini electronic ballast for 1x18W lamp bulb for independent use of fluorescent lamps. For bindings: G24d-2 - GX24d-2 Lamps: TC-D - TC-T
Philips electronic ballast 1x58w. Dimensions: 280x30x28mm
Ferromagnetic ballasts for 400W HS and HI lamps. Dimensions: 75x72x165 mm For high pressure sodium lamps (HS) and metal halide lamps (HI).
Ballasts for HS and HI Lamps 1000 W. Shape: 92x102 mm For high pressure sodium lamps (HS) and metal halide lamps (HI).
Dimmable electronic ballast for 1% to 100% dimming. For lamps T5 linear fluorescent tubes of 28W or 54W with a diameter of 16 mm with high luminous efficiency.
To be built in IP20 - Insulation Class 2 Self resetting protection against failed or broken lamps Lamp ignition with pre-heated cathods No flickering noises Input voltage: 190-240V AC or DC
Electronic ballast for discharge lamps, independent use with double terminal cover, with Wieland (ST-18) connector 220-240V 50 / 60Hz, for 35W or 70W metal halide lamp. Code: 183245 - EPC 35/2 Socket (35 W) : G12 -
Power supply ballast system for 18W single-bulb and double-bulbs fluorescent lamps. Compatible with G24D-2 and Gx24d-2 shape, (1x18 or 2x18W).
1-10V dimmable electronic ballast power supply for T8 lamps 2x36W, TC-L / F 2x36W.
For HID Lamps 35W Energy efficiency index EEI: A2 Power supply voltage: 220 ... 240 V Line Frequency: 50 ... 60 Hz RI suppression: to EN 55015 / CISPR 15
PCI 2/35 B011 Electronic ballast for metallic iodide lamps For discharge lamps with rated power of 2x35W
High performance control gear for discharge lamps.
Electronic ballast for T5 fluorescent tubes 4X14W of power.
Electronic ballast for T5 fluorescent tubes 2x14W 21W 28W 35W of power.
Electronic ballast for T5 fluorescent tube 1X49W of power.
Electronic ballast for fluorescent bulbs TC-L 2 x 26W and T8 2 x 38W.
Electronic ballast for TC-TEL / DEL lamps 2 x 26W / 32W / 42W / 57W.
Multi-lamp multi-power linear electronic ballast TCI for fluorescent lamps 2x39W 2x24-36-40W
Multi-lamp and multi-power mini electronic ballast for independent use TCI for fluorescent lamps. For attacks: GX24q-3 - G24q-3 -2G11 - 2G10 -2GX13 Bulbs: TC-D / E - TC-T / E - TC-L TC-F Power: 2x26 2x26 2x18-24
Electronic Ballast Tridonic Atco for fluorescent lamps 18W
To discharge lamps 70w Energy efficiency index EEI: A2 Power supply voltage: 220 ... 240 V Line Frequency: 50 ... 60 Hz RI suppression: to EN 55015 / CISPR 15
To discharge lamps 70w Energy efficiency index EEI: A2 Power supply voltage: 220 ... 240 V Line Frequency: 50 ... 60 Hz RI suppression: to EN 55015 / CISPR 15
Philips 70w open electronic ballast.
Electronic ballast 20w metal halide lamp discharge
PCI 0035 B011 Electronic ballast for metallic iodide lamps For discharge lamps with rated power of 35W
Miniature HID electronic gear for PGJ5 CDM lamps 20w – freeing up the boundaries of creativity and innovation in luminaire design
Electronic power supply for 35W HID metal halide lamps. Usable for metal halide discharge lamps. Code P100052010
Dimmable DALI or DSI For fluerescent bulb 1x32 / 42W