Dimmer, voltage and brightness regulators ready for delivery. With the use of these accessories it is possible to create environments, scenarios, increase and lower the ambient light. Models with manual push-button control or with remote control wifi and remote control are available .
The 905 Router uses an Ethernet connection (10/100 Mb/s) to control a local DALI network. Basic functionality is available out of the box without any programming. Helvar’s Designer software allows for advanced
Intelligent DALI lighting controls for single rooms. RoomSet is Helvar’s state-of-the-art lighting for rooms. It’s designed for repeatable spaces, including classrooms, meeting rooms and hospital wards. The RoomSet
Flos plasterboard anchor for Parentesi 100-240V lamp. Designed by Achille Castiglioni & Pio Manzù 1971.
TCI electronic dimmer Rondò to regulate the luminous intensity and the on / off switching of dimmable or halogen LED bulbs. Interrupted load with four wires from 0 to 440W in 220-240V and from 0 to 200W in 100-127V.
PDCV driver power supply for LEDs with constant voltage at 24V for a maximum of 13W (230V) and 10W (110V). Possibility to adjust the light intensity through 1-10V system with the use of a simple NA (Normally Open)
PDCV driver power supply for LEDs with constant voltage at 24V for a maximum of 13W (230V) and 10W (110V). Possibility to adjust the light intensity through DALI or Push system with the use of a simple NA (Normally Open)
Dimmable multipower power supply PDMC1 Driver for LEDs in constant current from 100mA to 700mA for a maximum of 13W (230V) and 9W (110V). Possibility to adjust the light intensity through 1-10V system with the use of a
Dimmable multipower power supply PDMCD Driver for LEDs in constant current from 100mA to 700mA for a maximum of 13W (230V) and 9W (110V). Possibility to adjust the light intensity through DALI or Push system with the use
Flos dimmer plus on / off switch for LED of the flos Arco floor lamp. Complete with cable holder and junction jack as shown in the photo. Electronic regulator for dimmable LED lamps, 100-240V. Designed by Achille and
Flos dimmer rondò plus on / off switch for LED or halogen bulb of the flos Parentesi lamp. Complete with E27 screw lamp holder and plug as in the photo. Electronic regulator for dimmable halogen and LED bulbs, 100-240V.
Interface dimmer for DALI BUS (9-26V) for home automation Domotic, allows to create a DALI line to control compatible devices and accepts dimming via the 0-10V or 1-10V button. TIMER function 3 minutes. Use cable
Intelligent Rotary knob smart Dimmer interface with the latest generation Zigbee 3.0 protocol with a wide input voltage 100-240V for the management of the trailing edge signal (phase cut). It allows you to control the
Intelligent interface with the latest generation Zigbee 3.0 protocol and high volatge push (8-230V) to manage trailing edge (phase cut) signal. Via button (Switch), remote control, Application on the phone by Philips
Dimmer controller with rotary system, ideal for regulating light intensity and managing 12 / 24V or 230V systems. Brightness adjustment via central rotary switches, ON-OFF button included. Recessed or surface mounted
Dimmer controller with touch system, ideal for adjusting light intensity and managing 12 / 24V systems. Brightness adjustment via TOUCH ring, ON-OFF button included. Recessed or surface mounted with special kit to be
RGB controller with touch system, ideal for adjusting light intensity and managing colors in different scenes of 12 / 24V RGB systems. Recessed or surface mounted with special kit to be purchased separately. Dimensions:
AIRAM Wireless starter kit set with HUB remote control and a 4.8W GU10 LED bulb that develops 385 lumens with 2700K warm light, dimmable. Operation is based on the ZigBee 3.0 protocol. The control range in the open area
Recessed rotary dimmer available for different recessed series suitable for regulating dimmable LED bulbs of the best brands on the market (the applicable power is equal to a minimum of 4W to a maximum of 160W) and
Universal dimmer dimmer for LED, incandescent and halogen lamps with LED light indicating power presence. In thermoplastic material. Max 4 adjustable LED lamps, for a minimum power of 4W and a maximum of 25W. Halogen and
Universal dimmer controller for 110V LED lamps and spotlights, for a maximum output load of 100W. Cod: RF22227-USA
Electronic dimmer with radio-frequency 12-24V coded remote control for a maximum of 96W at 12V and 192W at 24V. Ideal for LEDs. Maximum Reception Distance of 10 meters. IP20 protection degree for indoor use. Dimensions:
Recessed touch dimmer sensor operating at 12-24V for a maximum of 60W. Blue circular LED light on / off on the top. Ideal for strips and LED modules. Including AMP / JST adapter. Cable length 2 x 150cm + AMP (plug).
Recessed lighting management device for adjusting the brightness through a light sensor. Control via 10 A output relay for ohmic, inductive and capacitive load. Light management with connection to an app via the
Recessed lighting management device for adjusting the brightness through a light sensor. Control via DALI system. Light management with connection to an app via the Bluetooth of your smartphone.
Let your imagination come out with our smart 'Smart Wifi Switch' switch. This power supply works with any standard electrical device. Use multiple ways to control and create group configurations throughout the home. You
Dimmable 1-10V control unit with 1 channel for 10-24V LED modules. Power supply not included. Max. 120 W in 24V - 5A.
The DALI PCU provides intuitive manual dimming and switching of DALI light fittings, and implements DALI edition 2.
Dimmer and switch on/off for LED through-wire, for dimmable LED and halogen bulbs. Ideal for adjusting the light intensity.
Dimmer for strip LED 12/24V with 4 zone Remote
The signal amplifier DIM SA in combination with 1...10V control units is used for the control of electronic ballasts (ECG) with a 1...10V interface. in 1-10v out 1-10v 100mA 1-10v signal amplifier repeater power
Phase cut dimmer : 4-160W For LED and halogen bulbs For civil series bticino light
Resistive power adjustable 25-400W (Incandescent and Halogen lamps) Inductive power adjustable 25-300W (Toroidal transformers, Electromechanical and Electronic) Led and CFL lamps dimmable 4÷200W Led lamps 12Vac with
Flos dimmer plus on / off switch for LED of the flos Arco floor lamp. Complete with cable holder and junction jack as shown in the photo. Electronic regulator for dimmable LED lamps, 100-240V.
Brightness controller with control DALI or 1..10V with low voltage push For resistive loads up to 12A Input 12V-24V/DC Dimensions 138x40x28,5 mm